4th gen audio in 3rd gen car
#1
4th gen audio in 3rd gen car
Hi guys,
I transplanted a GM Monsoon CD unit from a wrecked '00 T/A into my '86 T/A...the CD unit installed easily with only minor mods to the mounting brackets and an aftermarket adapter for the wireing harness...my problem is with the GM amplifier for the Monsoon system...the amp has the factory pigtail cut from the doner car but I have no way of knowing the wireing for the speakers, power, etc...I visited a number of Pontiac dealers to see if a wirering diagram is available but I struck out...anyone know of a wireing schematic for this audio system?...MTIA!!!
Dave
I transplanted a GM Monsoon CD unit from a wrecked '00 T/A into my '86 T/A...the CD unit installed easily with only minor mods to the mounting brackets and an aftermarket adapter for the wireing harness...my problem is with the GM amplifier for the Monsoon system...the amp has the factory pigtail cut from the doner car but I have no way of knowing the wireing for the speakers, power, etc...I visited a number of Pontiac dealers to see if a wirering diagram is available but I struck out...anyone know of a wireing schematic for this audio system?...MTIA!!!
Dave
#2
Supreme Member
iTrader: (4)
Re: 4th gen audio in 3rd gen car
Since its a monsoon CD player, I THINK the RPO codes were W55. W54 was casette.
Here are some schematics I got from AUTOZONE's website. They get them from alldata. There are lots of different schematics for the 4th gen radio systems. Lots of options. Here are the ones that list 2000 specifically, and see to have what you need.
Here's one for amplifier to speakers...but it has 2002 next to it. This is where it gets confusing. Log into autozone's website and "sign in"... Pick the 2000 TA, and go down into the DIY repair info section. You can get all the wiring diagrams, and pick what you need.
There are a bunch of em...I just grabbed a few that looked like they'd help. Make sure you confirm thats wha tyou need so you dont catch anything on fire haha.
J.
Here are some schematics I got from AUTOZONE's website. They get them from alldata. There are lots of different schematics for the 4th gen radio systems. Lots of options. Here are the ones that list 2000 specifically, and see to have what you need.
Here's one for amplifier to speakers...but it has 2002 next to it. This is where it gets confusing. Log into autozone's website and "sign in"... Pick the 2000 TA, and go down into the DIY repair info section. You can get all the wiring diagrams, and pick what you need.
There are a bunch of em...I just grabbed a few that looked like they'd help. Make sure you confirm thats wha tyou need so you dont catch anything on fire haha.
J.
#4
Supreme Member
iTrader: (4)
Re: 4th gen audio in 3rd gen car
No prob man. Just hope it helps ya out. Like I said, there were so many diagrams listed for the radio system...I just grabbed the ones that jumped out at me as being useful.
Too bad you couldnt just get the entire harness from the car. You might have been able to make it plug and play except for the speaker hook ups.
Good luck!
J.
Too bad you couldnt just get the entire harness from the car. You might have been able to make it plug and play except for the speaker hook ups.
Good luck!
J.
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
12
05-19-2020 07:02 PM
1992 Trans Am
Exterior Parts for Sale
5
04-04-2016 12:50 PM
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
08-17-2015 07:45 PM