Northern Great Plains and Rocky Mountain Regional Board for Colorado, Kansas, Nebraska, Utah, Wyoming, Montana and the Dakotas.

So, I bought a 88 Iroc for 150

Thread Tools
 
Search this Thread
 
Old 10-03-2016, 09:28 PM
  #1  
Junior Member

Thread Starter
 
HeadInTheClouds's Avatar
 
Join Date: Apr 2006
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
So, I bought a 88 Iroc for 150

Its a basketcase. Interior is faded with missing and butchered pieces. The outside has 3 layers of paint, hood is scrap, rear bumper is ripped, and the core support got pulled up in the middle. No engine or trans. Checked the codes and its a white hardtop, 305,auto, drum rear, with tan interior. It was going to the scrap yard or some one buy it. So I went and got it.

Anyone in the Eastern Montana area ?
Old 10-03-2016, 09:33 PM
  #2  
Member

 
M G Brewer's Avatar
 
Join Date: Jul 2009
Location: Nicholasville, Ky
Posts: 344
Received 7 Likes on 7 Posts
Car: 1988 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 2.77
Re: So, I bought a 88 Iroc for 150

Post up some pics!
Old 10-03-2016, 11:12 PM
  #3  
Junior Member

Thread Starter
 
HeadInTheClouds's Avatar
 
Join Date: Apr 2006
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Re: So, I bought a 88 Iroc for 150











Wheels swapped. Was white. primer. Teal. Then primer again. It's like 3/8 thick. Don't know if it was worth the time to save, but I went ahead
Old 10-03-2016, 11:41 PM
  #4  
Junior Member

 
pwessels's Avatar
 
Join Date: Oct 2003
Location: Abbotsford, BC, Canada
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
Car: 87 Iroc Convertible
Engine: 305 TPI
Transmission: 5-speed
Axle/Gears: G92
Re: So, I bought a 88 Iroc for 150

I have seen worse interiors for sure! Parts are still relatively easy to find and not too outrageous compared to other cars. Good luck!
Old 10-04-2016, 07:21 AM
  #5  
Supreme Member

iTrader: (3)
 
PurelyPMD's Avatar
 
Join Date: Jan 2013
Location: Newtown, CT
Posts: 3,038
Received 46 Likes on 37 Posts
Car: 1987 IROC Original Owner
Engine: LB9
Transmission: M39 MM5
Axle/Gears: G80 G92 J65
Re: So, I bought a 88 Iroc for 150

I would continue to part that car out - you can find better starting points for far less than this one will take to move forward.

That being said, there are so many parts on that car that can bring good money. Screws, fasteners and many of the miscellaneous parts can be placed on e-Bay for a few dollars and people will pay it to avoid the nuisance of finding them someplace else. The console screws, hatch trim plastic screws, headliner trim - big money when you start breaking it down. You could easily part that car out and end up with $1,000 or more in your pocket after everything is said & done. Then go buy a better car!
Old 10-04-2016, 09:33 AM
  #6  
Member

iTrader: (4)
 
dlinger's Avatar
 
Join Date: May 2012
Location: Laurel, MT
Posts: 299
Received 17 Likes on 13 Posts
Car: 1984 Z28 HO
Engine: 305
Transmission: 700R4
Axle/Gears: 3.73
Re: So, I bought a 88 Iroc for 150

Originally Posted by HeadInTheClouds
Anyone in the Eastern Montana area ?
I am in Billings area.
Old 10-04-2016, 12:48 PM
  #7  
Junior Member

Thread Starter
 
HeadInTheClouds's Avatar
 
Join Date: Apr 2006
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Re: So, I bought a 88 Iroc for 150

Originally Posted by dlinger
I am in Billings area.
That's like almost 4 hours from
Me. Any good places for parts up there? I see quite a few fbody parts up on Craigslist there. Only crappy thing is I'm on call like every day.
Old 10-04-2016, 12:59 PM
  #8  
Junior Member

Thread Starter
 
HeadInTheClouds's Avatar
 
Join Date: Apr 2006
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Re: So, I bought a 88 Iroc for 150

Originally Posted by PurelyPMD
I would continue to part that car out - you can find better starting points for far less than this one will take to move forward.

That being said, there are so many parts on that car that can bring good money. Screws, fasteners and many of the miscellaneous parts can be placed on e-Bay for a few dollars and people will pay it to avoid the nuisance of finding them someplace else. The console screws, hatch trim plastic screws, headliner trim - big money when you start breaking it down. You could easily part that car out and end up with $1,000 or more in your pocket after everything is said & done. Then go buy a better car!
I really didn't plan on buying an iroc. I've been trying to find a 68or69 gto project. Or a 68 to 70 Chevelle. Need more room as I have a kid now. I already have a 02 ta ws6. I just bought to save it. Lol. Don't really have a plan. I like this body style. Always wanted one
Old 10-04-2016, 01:32 PM
  #9  
Member

iTrader: (4)
 
dlinger's Avatar
 
Join Date: May 2012
Location: Laurel, MT
Posts: 299
Received 17 Likes on 13 Posts
Car: 1984 Z28 HO
Engine: 305
Transmission: 700R4
Axle/Gears: 3.73
Re: So, I bought a 88 Iroc for 150

Originally Posted by HeadInTheClouds
That's like almost 4 hours from
Me. Any good places for parts up there? I see quite a few fbody parts up on Craigslist there. Only crappy thing is I'm on call like every day.
I don't know what yards have, always closed when I have time to look. There is a guy between Laurel and Rockvale that has 3rd gen parts cars but I lost his number. I have had best luck on 3rd Gen and ebay for getting parts.
Old 10-04-2016, 03:34 PM
  #10  
Supreme Member

iTrader: (3)
 
PurelyPMD's Avatar
 
Join Date: Jan 2013
Location: Newtown, CT
Posts: 3,038
Received 46 Likes on 37 Posts
Car: 1987 IROC Original Owner
Engine: LB9
Transmission: M39 MM5
Axle/Gears: G80 G92 J65
Re: So, I bought a 88 Iroc for 150

Originally Posted by HeadInTheClouds
I really didn't plan on buying an iroc. I've been trying to find a 68or69 gto project. Or a 68 to 70 Chevelle. Need more room as I have a kid now. I already have a 02 ta ws6. I just bought to save it. Lol. Don't really have a plan. I like this body style. Always wanted one
I'd sell you my 68 GTO project if you really want a project....I'd even take your TA towards it.

68 RA II/Auto, Verdoro Green/Black interior PM if you want more details.
Old 10-07-2016, 01:30 AM
  #11  
Junior Member

Thread Starter
 
HeadInTheClouds's Avatar
 
Join Date: Apr 2006
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Re: So, I bought a 88 Iroc for 150

Originally Posted by dlinger
I don't know what yards have, always closed when I have time to look. There is a guy between Laurel and Rockvale that has 3rd gen parts cars but I lost his number. I have had best luck on 3rd Gen and ebay for getting parts.
Old 10-07-2016, 01:42 AM
  #12  
Junior Member

Thread Starter
 
HeadInTheClouds's Avatar
 
Join Date: Apr 2006
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Re: So, I bought a 88 Iroc for 150

Originally Posted by PurelyPMD
I'd sell you my 68 GTO project if you really want a project....I'd even take your TA towards it.

68 RA II/Auto, Verdoro Green/Black interior PM if you want more details.
When I was high school I wanted a Ws6 so bad, but couldn't afford it. I looked at buying
a third gen as well and a 97 SS. Probably why I felt a need to get this. Ended up with a Monte Carlo. Insurance was a killer. So, I saved a long while and paid cash for one. Flew to Maryland and picked it up with 15k on it. My son loves riding around with the t tops off. Ill probably never get rid of it. Dream car!

I'll pm just out curiousity
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
johnbhm
Engine/Drivetrain/Suspension Parts for Sale
7
09-23-2016 09:08 AM
weswisehart
LTX and LSX
52
09-12-2016 08:58 AM
1986_IROC-Z
Body
2
09-05-2016 10:28 PM
Dw5574
DFI and ECM
2
08-31-2016 07:32 AM
Cripley
Body
3
08-28-2016 12:10 AM



Quick Reply: So, I bought a 88 Iroc for 150



All times are GMT -5. The time now is 11:05 AM.