will this ignition kit work?
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Highwood, IL
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 trans am
Engine: Vortec 350 w/ a comp cam
Transmission: B&Mth350 2800holeshot
Axle/Gears: 10bolt 3.23's
will this ignition kit work?
i have an 86 so i currently have the coil in cap distributor which i am going to have to replace with a small cap distributor with external coil when i instal my HSR.
will this kit from summit work even though it says "This ignition system is designed for carbureted, non-computer controlled applications only."
is there a way to make it work?
-edit- i forgot to put the link in, here it is:http://store.summitracing.com/partde...5&autoview=sku
will this kit from summit work even though it says "This ignition system is designed for carbureted, non-computer controlled applications only."
is there a way to make it work?
-edit- i forgot to put the link in, here it is:http://store.summitracing.com/partde...5&autoview=sku
Last edited by MaNiAk86; 03-14-2007 at 10:13 PM.
#2
Supreme Member
well carb engines used the same large cap HEI
but were EST controlled as were FI engines
apparently 86 was the last year for the large cap HEE except corvettes throguh 91 and i did not know this til i found this page http://www.fuelinjection.com/portinj.html
what exactly are you doing
i guess someone else will know, cuz i dont, but i learned something new here, lol
good luck
but were EST controlled as were FI engines
apparently 86 was the last year for the large cap HEE except corvettes throguh 91 and i did not know this til i found this page http://www.fuelinjection.com/portinj.html
what exactly are you doing
i guess someone else will know, cuz i dont, but i learned something new here, lol
good luck
Last edited by Randy82WS7; 03-14-2007 at 03:07 PM.
#4
Member
Join Date: Nov 2002
Location: Okinawa, Japan
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 383 w/Holley Stealth Ram
Transmission: Pro-built 700R4
Axle/Gears: 3.73
shouldn't matter as long as you get the two plugs for the Distributor. in the small caps distro. its one pink and one white wire for each plug if i remember correctly. these control the spart from the distro. hope this helps some. without seein the large cap and the wires thats all i can say. GL
#5
Senior Member
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Highwood, IL
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 trans am
Engine: Vortec 350 w/ a comp cam
Transmission: B&Mth350 2800holeshot
Axle/Gears: 10bolt 3.23's
on my large cap there is 2 wires that plug into the side. one for tach, and one for bat, im not sure on the colors since they arent in the best shape but i think im gonna call summit to see if they think it will work.
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
02-03-2019 12:21 AM
hectre13
Engine/Drivetrain/Suspension Parts for Sale
7
08-26-2015 08:17 AM