BADNBLK

iTrader: (11)

Alright everyone... We only had 8 convertible nominated this month, so we are gonna put every vehicle nominated into a voting spot this month.

There are some heavy hitters this month in the 'vert COTM, so I'm gonna ask for this month if there is additional pics or information about the vehicles that might help people see why your nomination/car needs to win this month please post them up

iansane





Kat



shr00m



BlueZee28



okfoz


Mr.IROC-Z



gerrym



FSTFBDY



Vote wisely... you can only do it once, and once the vote is made it cannot be changed.

BlueZee28

iTrader: (30)

Can we post a video?

BADNBLK

iTrader: (11)

I think that would be fine.

To the rest of the nominees feel free to post up a little more about your cars, now that you have made it this far.

UnderCover89TBI

iTrader: (25)

video please...lol j/k I already voted anyway so the video will not change my vote

BlueZee28

iTrader: (30)

I was gonna post either a dyno vid or a burnout vid haha

TPI-Formula350-

nice cars, had to go with Mr.Iroc Z

BlueZee28

iTrader: (30)

Here's a couple of pictures and a video of my 420hp/407ft lbs pull on the dyno. There's a couple other videos of the car on my youtube channel, one's a burnout, a couple of it idling, etc.


Most of the information on the car is in my signature. It's a 6.0L iron block LSx motor with a T56, a big cam with supporting bolt ons, full suspension, etc.

http://youtu.be/Vo84h950c3o

Kat

iTrader: (4)

Dynos eh Good tuning tool.. I prefer this..

http://www.youtube.com/watch?v=L5768...1&feature=plcp

Much more fun.

Oh and I think four or five of the cars posted on here have been in GMHTP...

http://www.gmhightechperformance.com...aro/index.html

intruder

iTrader: (1)

nick got my vote good luck

406ci91rs

All nice cars but im with Mr. Iroc

BlueZee28

iTrader: (30)

I had it tuned while driving around town, the dyno was just for giggles. I haven't had it back to the track since the 10 bolt broke. I really want to get some times with the new rear end.

SKELITOR117

iTrader: (3)

Wow. I'm suprised blueZ doesn't have more votes.

Mr. IROC-Z

iTrader: (1)

If you guys would like to see more pics of my car you can click on the link below. These are various pics of the car through out its life.

http://smg.photobucket.com/albums/v486/al-erie/Camaro/

FSTFBDY

iTrader: (33)

Voted and not for myself.

iansane

iTrader: (1)

Looking at the results so far, I don't think this is going to be much of a competition.


5.3 LSx, 6 speed trans, GC weight jacks, bilsteins, camber plates, c6 zo6 14" brakes, yadda yadda yadda. How many of these cars have been totaled before? I know mine has!






Hehe, I use the hell out of my car everyday possible. And because of that I've got a bit over 230k so far.

Currently in the garage getting a full wire tuck, coil relocate, front mount turbo, reverse cowl hood, radiator dumped forward




Hopefully running and tuned by mid april.

Kat, I forgot about the GMHTP blurb! Ha.

http://www.gmhightechperformance.com...ble/index.html

shr00m

iTrader: (2)

Well considering it's going on the 8th year after the wreck and it's still not done, I'm gunning more for car of the next decade.

Car is a 92 Jade Green TA, and pretty much nothing on it hasn't been modified in some way or another. To see everything that I've done to it, check out the 8 page build log on my website:

http://www.ms-fbodies.com/jade_ta.htm

Just a few of my favorite pics:

First off a new never released pic of the current state of the door panels:



Tearing up the auto-cross:



Trunk stereo gear:





Back seat subwoofer box:





Hand made functional air box for the RA1 hood:



Current underside:



Pretty much full 4th gen interior hand made perfect fit a-pillars. Old Pic:



Again, best bet to understand the 8 year journey is to go here:

http://www.ms-fbodies.com/jade_ta.htm

Thanks for the nomination,

Kevin D.

InfernalVortex

iTrader: (4)

Tough month to pick... I picked iansane because his car turned me onto competition gray wheels. Just a very well set up car visually and mechanically.

Z28FAST1

Voted for BlueZee but Kat was my next choice

Bullydawg

iTrader: (7)

Wow... Too many sweet 'Verts in here... Makes me want to pick one up for my next project.

FSTFBDY

iTrader: (33)

Way to many nice cars to pick from. Hell mine would be last on the list compared to all the others here cool to see I make the cut even if I dont win.



Parked in its heated and A/Ced home.


and just some info for future searches so its posted if anyone asks.

New Black viny Top
new black carpet
Harwood 3inch cowl hood
new grill
Black interior (soon to be graphite 4thgen interior dash,door panels , etc..)
17" 10 spoke rims 2inch skulte spacers , with kuhmo escta supra 275/40/17
Polly motor mounts
Alloy eng. caster/camber plates

Engine Info:
'94 LT1 383 Stroker
Callies racemaster crank, Callies Pro I rods. Everything been balanced
JE -33cc dished pistons.(Thermal Coated) with Hellfire rings
stock ported heads (Thermal coated valves and chambers)
All coated Clevite bearings
All ARP Bolts
comp xfi cam 224/236 @.050 .502/.510 with 1.5's
Polished valve covers & fuel rails.
Intake has been converted to run Distributor. (no more opti spark)
MSD PRO Billet Distrib.
LT4 timing chain set
50lb Injectors
Novi 2000 Super charger
innovate motorsports lc1 wb o2 setup.
csr Electric water pump
3bar map sensor
Canton Road race oil pan & pick up.
An fitting and braided lines for Power steering pump and supercharger oil feed and return.
stainless SLP Headers and Y pipe. 3chamber flowmaster where cat use to be with turn down

Built FTI Th400 , transgo shift kit. deep aluminum pan
PTC 3500 converter.
9 bolt rear with 3.45's
Spohn adjustable trq arm and crossmember,(TRQ Arm mounts to the crossmember NOT the tranny) Spohn crossmember etc...
Comp. Eng. Main Hoop for a 8point roll bar welded in. Never got around to finishing the rest.

Running on $59 code with the 7730 ecm. 3bar map.

UnderCover89TBI

iTrader: (25)

I really appreciate all the extra pics and video's guy's show off those beauties!

BlackenedBird

iTrader: (5)

How about info on each car when posting for the COTM? I can see that some of the owners have but not all of them. If TGO is going to ask us to vote, then TGO should provide more than just a single pic. Or is this a "beauty contest"? I had my vote based on only the pics that TGO posted until I saw pics by one of the other owners. But based on that, I would still like to see the info on the other car as well. Basically....Give us info on ALL the cars or this is merely a beauty contest & not actually about the car.

iansane

iTrader: (1)

At this point it's not 'officially' TGO putting all the pictures together it's still just BADNBLK. He's just one guy trying to build the camaraderie of TGO. Demanding pictures/info of every car would be kind of difficult since the nominations aren't made by the cars owners and he'd have to go track down build threads or try to get ahold of each member which could take a number of days. I know I have a build thread somewhere on here but it's by no means complete. Just my .

Kat

iTrader: (4)

Alright...

1988 Chevrolet Camaro Convertible
1991-1992 Ground Effects

11.575 @ 117.50 MPH - 1.581 60'

Suspension:

All Spohn Performance

Poly / Delsphere Rear Lower Control Arms and Panhard Bar
Rear lower control arm relocation brackets
Tubular Subframe Connectors
Tubular Front K-member
Front coil over kit with 275 lb springs
Spherical strut mounts
Tubular Front A-arms
Crossmember mounted adjustble torque arm
36mm poly front sway bar bushings
Poly trans mount
Poly rear sway bar bushings
Koni Red shocks and struts

Engine:

JS Performance 355 c.i. SBC
1996 4 bolt main block bored .030 over
Scat crank
Scat rods
Howards forged pistions
Cometic head gaskets
Ported AFR 195's
11:25:1 compression
Cam Motion cam. Mid 240's duration, almost .600 lift at the valve and it is on a 112 lsa
Comp Cams 4130 1 peice push rods
PRW 1.6 Roller Rockers
JS Performance ported Holley Stealth Ram with Kirban afpr and Lucas 42lb injectors
BBK 58mm throttle body
Melling 55 oil pump
Amsoil Dominator oil
All computer tuning done by me (7730 ecm)
MSD Dist
MSD 6AL-2 (with the 2 step)
NGK FR5's
ARP bolts throughout.

Exhaust:

Hooker 2210
Mufflex 3" Y pipe
Random Tech cat back 3" in and dual 3" out

Transmission:

700 R4
TransGo 2--3 reprogramming kit
Rebuilt with all the good stuff in 2001... Yes it has held up since then!
Vilgilante 9.5: 3000 stall torque convertor
Strange 3" 4130 Drive shaft

Rear End:

Strange S60 with 3.73s TrueTrac Posi 35 spline axles

Brakes:

4th gen LS1 brakes in the front and LT1 (PBR) Rear brakes.
Russel stainless steel lines
SLP Linelock kit

Top

91 Frame and latches
Top from topsonline.com with glass window.


I did all the paint, bodywork, installing the engine, and just about everything on the car I did pretty much alone in a driveway on 4 jack stands.




And from when I spun out into the wall..




Replaced the 1/4



Primer bodywork done



Final.. This was in GMHTP.

BADNBLK

iTrader: (11)

I wish I could give all of this info, but as stated below I cannot spend a ton of time searching out each members build threads and pics. Each nominated member received a PM IF they had not already posted in the nomination thread, and was advised to put up more information and pics if they wanted.

Thanks man. JT and TGO are behind this project, but its still a project that we are gonna continue work the kinks out of. GET MORE PICS OF YOUR CAR UP!!!!

Thirdgenlove

Wow I wish I had read all the comments before voting. I love the way Iansane looks that car is beautiful. Bt also shroom, wow. I love the 4th gen dash

UnderCover89TBI

iTrader: (25)

Yeah that dash looks nice. Although I am not a fan of 4th gen interior plastic's seem cheaper than third gen to me. But all beautiful cars none the less

BADNBLK

iTrader: (11)

We are on the home stretch with this one! Lets see what the last few days of the month do to the voting here!!!!

Good luck guys!