JohnC

iTrader: (1)

Im trying to separate my hatch glass from the actual metal hatch, and im having problems with it. All of the nuts and bolts are off, but I think its urethaned together....How do I get it apart?



By the way, I searched and didnt come up with anything.

JohnC

iTrader: (1)

Nobody knows?

navy02ws6

I'd be interested to know the answer to this as well -- I'll be swapping my glass for one with a defrost grid somewhere down the road.

JohnC

iTrader: (1)

ttt

HarmonyCamaro

i think im going to just get a new hatchback for mine... my back window is shot completely who ever had it with me put some kind of crap on it... now i cannot get it off the window.. and the door is off aligned and the stock spoiler is chipped but yea have fun trying to find the answer.

mean57

did you call a auto glass shop and ask someone?

phone first were all connected.

userchemical

just look around in some posts bro, do a search first.

here check out my thread, its in there...

https://www.thirdgen.org/forums/body...oration-2.html

TheBigJ

iTrader: (1)

I stopped removing mine, I am just gonna swap the whole hatch (if I continue) or i'll paint the metal since its rusting... and fill the gaps with some undercoatin

Pocket

iTrader: (24)

The trunk panel is held on with black sealant similar to the stuff around windshields

Use fishing line to get it loose

The black surround trim is just pinched on there
Move slowly and you can pop it off, but why bother

A replacement hatch is the easiest

JohnC

iTrader: (1)

Pocket, thanks so much. Exactly the answer I was looking for.



userchemical, I did search first. I didnt find anything.

mean57

#1 reason for removing it is to replace it with lexan for weight savings.
other than that just swap the hatch

gordo420

iTrader: (1)

I recently removed my hatch panel easlily by after removing all the bolts, dont forget the shocks as well, I took some wood wedges and placed them on top one on the edge the other in the center and last one on the oposite edge and used a rubber mallet and tapped all sides til I has able to pull it by hand and walla the declid is off

JohnC

iTrader: (1)

Why would I want to replace the hatch? There is just a tiny bit of rust on the metal decklid and it would be easier to fix without a huge glass stuck to it.

madhatter

iTrader: (1)

i just took mine apart a couple of days ago,i took a heat gun and put it on the high setting and moved it back and forth, be careful not to burn the paint off, so keep the heat moving, and slighty wiggle the metal, i will come loose pretty easy. it only took me about ten minutes to do. just remember that it is a pain in the *** to put back on, has to be done in the car so that the body lines still line up. good luck