They sent me the wrong 1LE calipers!-I think I got C4 style
08-28-2005, 11:01 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: New Mexico
Posts: 784
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Camaro Z28 5.7 G92
Engine: L98 Tuned Port Injection
Transmission: TH700R4
Axle/Gears: 3.23 Posi G80
They sent me the wrong 1LE calipers!-I think I got C4 style
I ordered the loaded pair of calipers from Autozone Morse part #P4343 for a 1990 Camaro IROC-Z with perf/pkge. They looked right except the space for the rotor between the pads was only like .85" and the hole for the banjo bolt is not at the bottom of the caliper, it is right behind the lower piston. We also had ONE drivers side caliper by Fenco (C364) in stock so I pulled it out and it looks right. It has the correct placement of the banjo bolt facing straight down AND 1.1xx inches between the SAME morse pads.
Does that sound like I got C4 calipers?
Does that sound like I got C4 calipers?
08-29-2005, 04:53 PM
#4
Senior Member
Thread Starter
Join Date: Sep 2003
Location: New Mexico
Posts: 784
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Camaro Z28 5.7 G92
Engine: L98 Tuned Port Injection
Transmission: TH700R4
Axle/Gears: 3.23 Posi G80
I checked your site but, AZ is still cheaper for me since I get 20% off. 1LE calipers reg. priced at only $32.55 lifetime warranty with a 30.00 core at my store and they are in stock. But now it looks like I will have to buy pads too.
09-19-2005, 03:28 PM
#5
Member
Join Date: Aug 2005
Location: St. louis
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 berlinetta
Engine: none
Transmission: 700r4very soon t5
i work at autozone computer are very bad i had a 95 firebird come in for calipers there were boxed backwards i go to different store and my workers are dumb asses if your a true gear head youd know if its the wrong part by looking at it
Thread
Thread Starter
Forum
Replies
Last Post