Tube nut sizes
#1
Senior Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Thread Starter
Join Date: Apr 2000
Location: Wichita, KS
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92' RS
Engine: LO3
Transmission: Probuilt 700R4
Axle/Gears: 3.70 9-bolt
Tube nut sizes
What is the size of the tube nut that does into the proportioning valve for the rear main line? I found the one on the end of the line is 6mm, 12mm x 1.0 bubble flare what is the one that goes into the prop valve?
Thanks.
Thanks.
#2
Senior Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Thread Starter
Join Date: Apr 2000
Location: Wichita, KS
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92' RS
Engine: LO3
Transmission: Probuilt 700R4
Axle/Gears: 3.70 9-bolt
Re: Tube nut sizes
For the sake of others who need the information and perform a serach here is the info:
Tube nut size at prop valve: 14mm x 1.50 Classic tube part number (ST8043)
at rear flex line connector: 12mm x 1.0 PN (ST8048)
Tube nut size at prop valve: 14mm x 1.50 Classic tube part number (ST8043)
at rear flex line connector: 12mm x 1.0 PN (ST8048)
Thread
Thread Starter
Forum
Replies
Last Post