Camaros for Sale Post your Camaro for Sale.

88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

Thread Tools
 
Search this Thread
 
Old 07-31-2007, 06:06 PM
  #1  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

Hi all, unfortunately my time and desire to complete my project has come to an end.

We recently moved and I started a new job and I just dont have the time or desire to keep working on her, so let my loss be your gain.

1988 Iroc-Z
Medium Gray Metallic
Original 305 LB9 5spd Car

The New:
  • Rebuilt 350, flattop pistons, ZZ4 Cam, Original TPI, Pink Top Ford SVO Injectors, Custom Prom, MSD Sparkplugs/Cap/Rotor, Special abestos Heat wraps for the spark plug boots to keep em from melting.
  • Ceramic Coated Hooker 2055 Headers
  • Flowmaster American Thunder Catback
  • Catco High flow Cat
  • New Radiator
  • New Clutch
  • New Alternator
  • New Water Pump
  • New Power Steering Pump
  • New Serpentine Belt
  • New Distributor, and Spare Ignition Module
  • All Sensors and Relays are new
  • PBR Disc Brake Rear with Posi from 91Z
  • Eibach Sportline Springs
  • KYB Shocks and Struts
  • Rear Suspension has been completely rebuilt, Front Springs and struts still need to be installed, and I have energy suspension Poly bushing kit to be installed on the front as well.
  • I have a spare Iroc Style Hood, and spare door that are included
  • Original 305 is included
  • Original Drum Rear is included
  • I have all of the GFX and screws labeled in bags
  • I have all of the interior minus the carpet, door panels, visors and headliner. They were all worn out.
  • I have replacement Passenger side Floor Pan from Year One to be welded in.
  • I have numerous other spare gaskets and parts that come included here as well.

OK, so the reason I am selling is because I am just tired of working on the car. I have been working 12+ hours a day 7 days a week and frankly the car has been stressing me out even more, and my wife told me I need to sell the car...

The car runs EXCELLENT, very powerful, everything works correctly, fans etc... both fans kick on at 185, and the thermostat is 180. Transmission shifts fine, no problems with bad gears. All fluid is currently mobil 1 synthetic. Oil, Trans, and rear end.

The motor has exactly 426 miles on it. The only problem that the car has been having is that it is improperly wearing the distributor gear. I really have not had time to diagnose the problem fully.

All the car needs is to get finished. It needs the passenger side floor pan replaced and the replacement pan is included. The only other spot of rust is behind the passenger side wheel well going toward the trunk pan. Easily can be fixed by someone who can weld.

The car is not water tight, t-top seals have been removed. 1 complete set of t-tops is included and 1 spare passenger side t-top.

I also have a firebird radio pod that I will include because i had planned to convert to 4thgen console. the seats are included, dashpad is perfect no cracks. Front seats are worn, rears are in good shape.

Not sure what else. I have TONS of pictures of the whole process which can be viewed at http://www.jskme.com/irocz.htm

I have atleast 9k into the car, I truly have lost count, its probably more like 10k. I know I wont even get close to that, so just looking for best offer.

The car really is truly in great shape and just needs someone to love her the way I have and to finish her up.

The car runs and drives, but would need to be trailered to its destination.

Looking for $3500 complete

I have GM Factory service manuals and tons of other parts not listed. I really want everything to go to a good home.

feel free to ask questions, not trying to pull any wool over anyones eyes, just dont have the time or the money to finish the car.

If anyone is in the area, they are free to come look at it, I can call people if they would like to discuss the car as well.

Jonathan

Last edited by JB22; 08-20-2007 at 07:30 PM.
Old 08-01-2007, 07:56 PM
  #2  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

Bump.

Clean Title, no leans. 116k miles on body. 450 on new motor.

Listening to any offers.
Old 08-02-2007, 08:57 AM
  #3  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

First person with $3500 gets it. I have that into the motor alone.

Get it before I change my mind.
Old 08-05-2007, 09:46 PM
  #4  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

Would consider selling the car as a rolling chassis only. all interior parts that i have would be included as well as the original LB9 and Drum Rear if desired by purchaser.
Old 08-06-2007, 06:07 PM
  #5  
Member

 
My90Iroc's Avatar
 
Join Date: Nov 2000
Location: E. Patchogue, NY
Posts: 490
Likes: 0
Received 0 Likes on 0 Posts
Car: '90 Iroc
Engine: 305 TPI
Transmission: 5 spd
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

Are the "maiden voyage" pictures its current state?
Why does it need to be trailered to its destination?
Old 08-06-2007, 06:35 PM
  #6  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

Yeah, thats pretty much how it sits now. I have put the hatch glass back in, and por15'ed the drivers side floor pan. Its actually had a new alternator, serp belt and some relays replaced since then as well.

The reason I say trailered is because the car has not seen a ton of miles, so driving cross country would probably not be recommended. and also because of the distributor gear wear. The cam needs to get replaced in order to resolve this issue. The oil has been changed 5 times on this motor, as well as a magnetic drain plug for peace of mind.

Let me know if you have any other questions.

Last edited by JB22; 08-06-2007 at 11:13 PM.
Old 08-06-2007, 11:09 PM
  #7  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

If I dont get any bites soon on the car, i will be parting it out. The rolling chassis will be available for $1000.

Complete TPI 350, new injectors, MSD wires, coil, cap and rotor, new ACDelco ESC and knock sensor, all accessories and serpentine setup as well as the custom prom for the motor, T5 with new clutch - $2000 OBO

Jet hot Coated Hooker 2055's with Y-pipe, Catco high flow 3" Cat, Flowmaster American thunder catback - 700 for the package less than 500 miles on the system. Cost about 1100 new for everything

Eibach sportlines (red) - $200 shipped to lower 48 states

I'll have lots of other stuff too.

So, if your interested, the car parted out is worth more than I am asking. If I dont get any bites soon, I will just part it out.
Old 08-07-2007, 07:43 PM
  #8  
Junior Member
 
be5112's Avatar
 
Join Date: Dec 2006
Location: Hamburg, PA
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Camaro
Engine: 2.8L, soon to be 350/300HP
Transmission: Auto
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

how much for disk brake rear and what ratio is it, thanks Brandon
Old 08-07-2007, 08:41 PM
  #9  
Senior Member
iTrader: (9)
 
rsrsrs's Avatar
 
Join Date: Nov 2006
Location: LI, NY
Posts: 532
Likes: 0
Received 0 Likes on 0 Posts
Car: 90 Camaro RS
Engine: 2.8L v6
Transmission: 700
Axle/Gears: 3.23
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

willing to do any trades?
Old 08-07-2007, 09:09 PM
  #10  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

Rear is I believe is 3.23

On trades, i would listen, but would prefer to sell everything.
Old 08-08-2007, 07:07 PM
  #11  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

bump
Old 08-09-2007, 12:27 PM
  #12  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

If someone buys the whole car for 3500, ill throw in all the new emblems, iroc decals for the door, new turn signals, clear marker lights, spare hood, pass. side door and more.

$3000 for everything minus that stuff.

I really need to clear out the garage and I dont really want to part it out. Someone must want to get a good deal here?

All pictures of the car can be viewed here
Old 08-20-2007, 07:22 PM
  #13  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

Car is still for sale.

I have some cell phone movie clips to prove the car runs, I have receipts for all parts installed. All of the work I have done on the car is documented on my website listed above.

Shoot me a PM or email me if your interested.
Old 08-21-2007, 09:05 PM
  #14  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

No one interested? I dont have time or money to finish the car, and my wife wants the car gone...

Let my loss be your gain.

Someone has to want a nice project car thats affordable.

feel free to ask questions, I would like to get this sold ASAP.

Clear Title, no accidents, can send carfax if interested. I also have pictures of the car running as well.

Thanks guys.

Last edited by JB22; 08-21-2007 at 09:25 PM.
Old 08-27-2007, 03:19 PM
  #15  
Member
 
Yellow87Cam's Avatar
 
Join Date: Jul 2005
Location: Long Island, NY
Posts: 237
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 camaro
Engine: 6 cylinder
Transmission: 5-speed
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

can i get some pics to Transam346x@aol.com

Thanks!
Old 08-27-2007, 05:07 PM
  #16  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

There is a link above you can go for pictures
Old 08-27-2007, 05:19 PM
  #17  
Senior Member
Thread Starter
 
JB22's Avatar
 
Join Date: Apr 2005
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Re: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing

Car is no longer for sale.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bamaboy0323
Tech / General Engine
2
08-15-2015 07:20 AM
wruiz
TPI
15
08-13-2015 09:07 PM
gta power
Exhaust
1
08-13-2015 06:15 AM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM
mustangman65_79
Body
3
08-11-2015 03:17 PM



Quick Reply: 88 Iroc - TTops, 350 TPI 5psd NY Needs Finishing



All times are GMT -5. The time now is 11:08 AM.