teamcamaro

hey guys, i hav a question, i just put in an infinity perfect 12.1d in the trunk and i completely covered all the sheetmetal in the back with dynamat....but..im still having rattling issues. It seems to be the taillights and the rear bumper. Any of u guys have any idea what i could do to deaden those areas, thanx alot!

Screamin'87GTA

The tailights, i would pull them off and put something back there like velcro or something thick and soft, so when you tighten the lights down it will compress the material a little instead of a tiny gap between the plastic and metal...

The rear bumber, you might want to go to home depot and get some spray in a can called "great stuff" BE CAREFUL how you use it it does drip some. you might be able to fill in some air gaps..

CAMp3RO

be careful when dampening the taillights; i did and i believe part of the metal on metal contact is ground; i dampened the heck out of them only to get pulled over at 2 in the morning by a cop for no working taillights. i got off easy cause he saw that much of my interior was in the process of being put back together. as soon as i removed the foam i had put in, the lights were fine. so just pick your places carefully. oh, and double check the license plate; thats one of the places most likely to rattle. i put a piece of foam behind mine (not seen when the plate's up) and it help stop the rattle