Rattles, ahhh!!
#1
Member
Thread Starter
Join Date: Oct 2000
Location: Thornton, CO
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 Typhoon/ '79 Vette
Engine: Turbo 4.3L/Forged 355ci
Transmission: 4l60/th350
Rattles, ahhh!!
Just got in my new 6x9s, and they sound great. however they have notified me of a few objects that may not me screwed down tight or have come loose. i bought some V-Block, mainly to air-tighten the factory speaker pods, but i have pleanty left over to kill some rattles. i have killed a couple with it but some are being more pesky than others.
it would really help if you guys could give me some ideas where i can slap this stuff down. where it has worked for you etc. i dont really want to pull the door panel but i may have to.
oh and the passenger side is much worse than the driver side. the driver side is virtually rattle free, but the passenger is being a pain in the ĂSS
it would really help if you guys could give me some ideas where i can slap this stuff down. where it has worked for you etc. i dont really want to pull the door panel but i may have to.
oh and the passenger side is much worse than the driver side. the driver side is virtually rattle free, but the passenger is being a pain in the ĂSS
#2
Try using some foam stuff that comes in a can at Home Depot . I think it is called "Great Stuff"
------------------
Mike Kenny
Current: 1991 RS 305 TBI
Past: 1990 RS 305 TBI (A woman forgot what red lights are for)
Current: mostly stock - newer 305 w/ 12,000 on it
Eclipse speakers all around w/ 10" tube powered by a Alpine V12 in back
K&N filter w/XStream flow lid - It is sweet!!
Future: 2" Cowl hood
------------------
Mike Kenny
Current: 1991 RS 305 TBI
Past: 1990 RS 305 TBI (A woman forgot what red lights are for)
Current: mostly stock - newer 305 w/ 12,000 on it
Eclipse speakers all around w/ 10" tube powered by a Alpine V12 in back
K&N filter w/XStream flow lid - It is sweet!!
Future: 2" Cowl hood
#3
Member
Thread Starter
Join Date: Oct 2000
Location: Thornton, CO
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 Typhoon/ '79 Vette
Engine: Turbo 4.3L/Forged 355ci
Transmission: 4l60/th350
no, i have sound deadener (sp?) i am asking for recomendations on where to put it. where rattles are prone.
#4
TGO Supporter
Join Date: Jul 1999
Location: Another world, some other time
Posts: 3,838
Likes: 0
Received 4 Likes
on
4 Posts
Car: 86 LG4 & 92 TBI Firebird
Engine: The Mighty 305!
Transmission: 700R4
Axle/Gears: 3.42
Check those little black air vents in the door jams. The are quite troublesome when it comes to rattles.
------------------
-Justin-
T-Top '86 5.0L LG4 700R4 WS6 Now Bilstein equipped!
T-Top '92 5.0L TBI 700R4
My '86 Firebird Homepage
The F-body Model Kit Pictoral Archive (updated 9/18/00)
There can be only one!!
------------------
-Justin-
T-Top '86 5.0L LG4 700R4 WS6 Now Bilstein equipped!
T-Top '92 5.0L TBI 700R4
My '86 Firebird Homepage
The F-body Model Kit Pictoral Archive (updated 9/18/00)
There can be only one!!
#5
Junior Member
Join Date: Nov 2000
Location: Ames, IA, US
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Belive this or not, but the licence plate rattles too. I noticed mine doing it, I checked if it was secure correct and it was. I havent had time to mess with it, but there is another suggestion.
#6
Member
Thread Starter
Join Date: Oct 2000
Location: Thornton, CO
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 Typhoon/ '79 Vette
Engine: Turbo 4.3L/Forged 355ci
Transmission: 4l60/th350
Yea i know camaros are prone to rattles in license plates but i think ta's and fb's are diffrent. plus these are just for 6x9s, i havent even bought the subs yet.
and i already removed the little black "gasket" things on the door jam. does anyone know what the hell they are there for? it looks like its to let sound out but keep water out too. oh well it did get rid of the worst rattles when i took those things out.
and i already removed the little black "gasket" things on the door jam. does anyone know what the hell they are there for? it looks like its to let sound out but keep water out too. oh well it did get rid of the worst rattles when i took those things out.
Trending Topics
#8
Member
Thread Starter
Join Date: Oct 2000
Location: Thornton, CO
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 Typhoon/ '79 Vette
Engine: Turbo 4.3L/Forged 355ci
Transmission: 4l60/th350
well i think im just gonna live with it for now, then B-Quiet my entire car. cuz when the stereo is off, road noise is horrible. specially on the highway.
Anyone want to sell me thier interior? mines all warped from sittin in the sun.
Anyone want to sell me thier interior? mines all warped from sittin in the sun.
#9
Senior Member
Join Date: Oct 1999
Posts: 6,621
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
B-quiet is a great idea. I used it and must say I'm very excited about the results. Good luck.
------------------
, Jon (91 RS too many mods to list), getting new engine in summer
------------------
, Jon (91 RS too many mods to list), getting new engine in summer
#10
Member
Thread Starter
Join Date: Oct 2000
Location: Thornton, CO
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 Typhoon/ '79 Vette
Engine: Turbo 4.3L/Forged 355ci
Transmission: 4l60/th350
how many layers did you use for most of the car?
------------------
1985 WS6 Trans AM
glass T-tops
bone stock sloth of an engine LG4
T-5 tranny. thank god, i couldnt stand an LG4 auto.
Plans for an LT-1 or LT-4,
also plans for dual flowmaster exaust.
Got a corvette when i was 16, paid for it myself, screwed the engine up (idiot light didnt work, and i trusted the guy when he said he just changed the oil), and it turned into a project car.
now my TA is my daily driver. not a bad one, but it needs to be faster.
------------------
1985 WS6 Trans AM
glass T-tops
bone stock sloth of an engine LG4
T-5 tranny. thank god, i couldnt stand an LG4 auto.
Plans for an LT-1 or LT-4,
also plans for dual flowmaster exaust.
Got a corvette when i was 16, paid for it myself, screwed the engine up (idiot light didnt work, and i trusted the guy when he said he just changed the oil), and it turned into a project car.
now my TA is my daily driver. not a bad one, but it needs to be faster.
#11
Senior Member
Join Date: Oct 1999
Location: Austin, Tx
Posts: 786
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Formula
Engine: L98
Transmission: A4
What the heck is B-quiet?
------------------
http://kiztope.50megs.com
92 Rs 3.1/T-5
KYB Shocks and Struts, Blue Streak cap and rotor, neato new radiator!, RapidFire plugs
An overhead console!!
Clarion Head Unit,
Pioneer 6x9's,Cerwin Vega Plate 4x6's
.....
Its slowly but surely coming along....
AIM : Theonekiztope
ICQ: 8787542
Planetarion: 3GFB kiztope of kiztopia-Camera-92RS-A (33:6:14(?))
"No one knows until they learn" Leon Calrinsky (99)
------------------
http://kiztope.50megs.com
92 Rs 3.1/T-5
KYB Shocks and Struts, Blue Streak cap and rotor, neato new radiator!, RapidFire plugs
An overhead console!!
Clarion Head Unit,
Pioneer 6x9's,Cerwin Vega Plate 4x6's
.....
Its slowly but surely coming along....
AIM : Theonekiztope
ICQ: 8787542
Planetarion: 3GFB kiztope of kiztopia-Camera-92RS-A (33:6:14(?))
"No one knows until they learn" Leon Calrinsky (99)
#12
Member
Thread Starter
Join Date: Oct 2000
Location: Thornton, CO
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 Typhoon/ '79 Vette
Engine: Turbo 4.3L/Forged 355ci
Transmission: 4l60/th350
its sound deadining crap like dynamat, only not nearly as expensive. www.b-quiet.com
------------------
1985 WS6 Trans AM
glass T-tops
bone stock sloth of an engine LG4
T-5 tranny. thank god, i couldnt stand an LG4 auto.
Plans for an LT-1 or LT-4,
also plans for dual flowmaster exaust.
Got a corvette when i was 16, paid for it myself, screwed the engine up (idiot light didnt work, and i trusted the guy when he said he just changed the oil), and it turned into a project car.
now my TA is my daily driver. not a bad one, but it needs to be faster.
------------------
1985 WS6 Trans AM
glass T-tops
bone stock sloth of an engine LG4
T-5 tranny. thank god, i couldnt stand an LG4 auto.
Plans for an LT-1 or LT-4,
also plans for dual flowmaster exaust.
Got a corvette when i was 16, paid for it myself, screwed the engine up (idiot light didnt work, and i trusted the guy when he said he just changed the oil), and it turned into a project car.
now my TA is my daily driver. not a bad one, but it needs to be faster.
#13
Senior Member
Join Date: Oct 1999
Posts: 6,621
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
2 layers and 3 in some places, 1 in a few spots. It was more like 1 huge layer then patches for 2 layers and the doors are all 2 and the hatch is 3 is most places.
------------------
, Jon (91 RS too many mods to list), getting new engine in summer
------------------
, Jon (91 RS too many mods to list), getting new engine in summer
#14
Member
Join Date: May 2000
Location: Chilliwack, BC
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.7 V8 TPI
Transmission: T-5 5-Speed Manual
I found that after I replaced my metal 6"x9" baffles with 1/2" plywood ones the rattles ceased. If you haven't already, you may want to try this.
#15
Those flaps in the door jambs are one-way vents to encourage air circulation through your climate control system. They flap like a beeotch when you crank up the subs.
Although I have used a LITTLE, I wouldn't go crazy with "Great Stuff" I've seen it split all kinds of plastic parts. Go easy on it, and allow for at least 50% expansion, though I think it doubles...
Although I have used a LITTLE, I wouldn't go crazy with "Great Stuff" I've seen it split all kinds of plastic parts. Go easy on it, and allow for at least 50% expansion, though I think it doubles...
#16
Senior Member
Join Date: Nov 2000
Location: Richmond, VA
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
When the license plate rattles you can ghetto rig it. Just put a wet kitchen size sponge between the plate and the frame and slide it up till it stays and let it dry. My friend did this on his celica, cuz his bass hit really hard and rattled the license plate. Made a world of difference.
------------------
--Steve S--
1984 Trans Am 305 LG4, 5 speed Auto
RPO codes point to Recaro version
Daily Driver, Flowmaster 80 Series
------------------
--Steve S--
1984 Trans Am 305 LG4, 5 speed Auto
RPO codes point to Recaro version
Daily Driver, Flowmaster 80 Series
#17
Junior Member
Join Date: Mar 2000
Location: Northern,NJ
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Wow I thought I was the only one who has heard of using something to stop the license plate from rattling. Someone told me to use a rolled up pair of socks!
------------------
www.350iroc-z.com
------------------
www.350iroc-z.com
#18
for subs on my brother's camaro, the lisence plate was terribly annoying. I took a piece of carpet foam, cut to the size of the plate, then took one of those things that seals bags by melting them and sealed the foam in platic bag, that keeps the foam from keeping water and acting like a sponge, but it is still soft to keep it from rattling.
------------------
91 rs, convertible, K&N, Edelbrock open element cleaner, 3.73, B&M mega-shifter, goodmark cowl-induction hood,tinted windows
------------------
91 rs, convertible, K&N, Edelbrock open element cleaner, 3.73, B&M mega-shifter, goodmark cowl-induction hood,tinted windows
#19
Junior Member
Join Date: Jul 2000
Location: Miramar, Fl
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
to stop the annoying rattling of ur liscense plate, just bend the little tab that holds the bottom of the liscense plate in. bend it so that it squeezes the plate, and that will get rid of the rattle. thats what i did and 3 months later still no liscense plate rattle, now just bumber and tail light rattles
#20
Junior Member
Join Date: Dec 2000
Location: Largo, FL, USA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
I've killed almost every rattle thus far, 100+ ft of dynamat extreem. I now have it limited to the actual tail lights themselves and the bumber. The door took three layers of dynamat. The spioler I could figure out. What can stip them dam tail lights?!!?
Thread
Thread Starter
Forum
Replies
Last Post