When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CarburetorsCarb discussion and questions. Upgrading your Third Gen's carburetor, swapping TBI to carburetor, or TPI to carburetor? Need LG4 or H.O. info? Post it here.
I've inspected the Holley 4160 closely on car. The fuel levels are set correctly. No leaks from the bowls or the bowl screws. Nothing from the accelerator pump or fuel line. I thought perhaps the throttle shaft but it appears to sit below where the fuel is most obvious. The leak will dampen the carb-to-manifold gasket a bit at all four corners. Any suggestions?
BTW, while I've rebuilt the carb several times, I've never replaced the throttle body gasket.
JamesC
Last edited by JamesC; 10-27-2021 at 04:03 PM.
Reason: Additional Info
10-27-2021, 03:49 PM
