VE Problem...
03-13-2010, 02:59 PM
#1
Member
Thread Starter
iTrader: (3)
Join Date: Oct 2005
Location: East Helena, MT
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: Factory 2.73 (unfortunately)
VE Problem...
I have a 350 with BJYM.Bin with Advanced $0D v175 XDF.
My VE Tabel is all at 128's except for when I get into 50 Map and above. The Map is maxed out at 99.6 and I am getting from 135's to 145's. I tried adjusting the Injector Flow Rate per advice from another forum without sucess. Any other ideas for me to try?
Thanks,
R.S.
My VE Tabel is all at 128's except for when I get into 50 Map and above. The Map is maxed out at 99.6 and I am getting from 135's to 145's. I tried adjusting the Injector Flow Rate per advice from another forum without sucess. Any other ideas for me to try?
Thanks,
R.S.
03-15-2010, 01:23 PM
#3
Member
Thread Starter
iTrader: (3)
Join Date: Oct 2005
Location: East Helena, MT
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: Factory 2.73 (unfortunately)
Re: VE Problem...
Well, I have made some adjustments to the Cylinder Volume to get the BLM's in the area. I also turned off the EGR. I'm currently working on getting the BLM's in line. I will update as time and progress allows.
Thanks,
R.S.
Thanks,
R.S.
Thread
Thread Starter
Forum
Replies
Last Post
