Anyone interested in an Excel file for graphing winaldl loged data?
#6
Senior Member
Thread Starter
Join Date: Oct 1999
Posts: 6,621
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
Okay, I'll put it together in a user friendly macro of some sort. I might end up using a plug-in for excel but if that happens I'll make sure to tell you guys how to do it in another post.
Trending Topics
#8
Junior Member
Join Date: Feb 2000
Location: Mahwah, NJ
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Monte Carlo LS
Engine: 357 TPI, LT4 hotcam
Would the macros be useable with the logs that are created with Craig Moates software. I would love to see it if it is.
#10
Senior Member
Thread Starter
Join Date: Oct 1999
Posts: 6,621
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
Well I figured the easiest way to graph/chart the data with excel. Only problem is that there is so much to graph that it would be too confusing for me to actually make a macro.
The problems are the data length but I think I can work around this. Infact I know I can get around it, I just need to figure the simplest routine to do so. The other problem is what data YOU want displayed with what. I can compare and contrast. I can make 3d graph of the BLM and MAP/RPM but it isn't good if you have over 500 data logged rows!!!
I might just end up making a detailed technical article OR work with Jonas and do some nifty source code editing. Whatever happens I'll have this done soon. I'll post some pictures later but it's 4:30am and I'm trying to rid my blood stream of the booze.
The problems are the data length but I think I can work around this. Infact I know I can get around it, I just need to figure the simplest routine to do so. The other problem is what data YOU want displayed with what. I can compare and contrast. I can make 3d graph of the BLM and MAP/RPM but it isn't good if you have over 500 data logged rows!!!
I might just end up making a detailed technical article OR work with Jonas and do some nifty source code editing. Whatever happens I'll have this done soon. I'll post some pictures later but it's 4:30am and I'm trying to rid my blood stream of the booze.
#12
JP-
I recently wrote macros for myself that acted similiar (I think, can not be sure) to VEMaster for the 7730 ECM. The file ended up being over 40 MB in size. I realized it was too large to share with others, and I was able to shrink it down to 80KB by adding one more macro. I haven't worked on that project for a while, but if you know VB, I can send you the macro code and you can take a look at how the macro was written. Regards, -Matt-
EDIT-BTW, my file took 8000 data sets and manipulated them. I had a separate file for lower VE and upper VE so I could just copy and paste into TC editor. Since it used 8000 data points, THAT is why I needed the extra macro to shrink the file size down from 40 MB to 80KB.
I recently wrote macros for myself that acted similiar (I think, can not be sure) to VEMaster for the 7730 ECM. The file ended up being over 40 MB in size. I realized it was too large to share with others, and I was able to shrink it down to 80KB by adding one more macro. I haven't worked on that project for a while, but if you know VB, I can send you the macro code and you can take a look at how the macro was written. Regards, -Matt-
EDIT-BTW, my file took 8000 data sets and manipulated them. I had a separate file for lower VE and upper VE so I could just copy and paste into TC editor. Since it used 8000 data points, THAT is why I needed the extra macro to shrink the file size down from 40 MB to 80KB.
Last edited by HighHopes85; 01-28-2002 at 10:25 AM.
#13
Senior Member
Thread Starter
Join Date: Oct 1999
Posts: 6,621
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
It's funny, I didn't know VB code was all that hard until I tried adapting. I'm teaching myself the language but I'd love some source code to play with.
Send it my way. For the time being I'm just going to write up a tech article that explains how to graph/chart only the data you want to display. The hard part is trying to use pulldown menues and having them manipulate the chart's x axis. I'm pretty close to a final piece but I've got 3 exams in the next couple days.
I haven't forgoten, it's just taking a while .
Send it my way. For the time being I'm just going to write up a tech article that explains how to graph/chart only the data you want to display. The hard part is trying to use pulldown menues and having them manipulate the chart's x axis. I'm pretty close to a final piece but I've got 3 exams in the next couple days.
I haven't forgoten, it's just taking a while .
Thread
Thread Starter
Forum
Replies
Last Post
camaro1185
Engine/Drivetrain/Suspension Parts for Sale
4
10-26-2015 06:51 AM
IROCZDAVE (88-L98)
Exterior Parts for Sale
1
09-22-2015 08:28 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
2
09-17-2015 07:43 AM