vats bypass module wiring help
03-01-2006, 03:42 PM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2005
Location: lynchburg va
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 chevy camaro rs
Engine: lt1
Transmission: 4l60e
Axle/Gears: 273:(
vats bypass module wiring help
i purchased a lt1 vats bypass module. it was a painless. and i dont have the wiring diagram or even the pinouts of where the 3 wires go. i need help. its a black little box with 3 wires. black red green. what are the pin outs for this on the ecm? 95 lt1 btw
lt1350 uses this
grey module to pcm black plug pin 29
blue module to prm red plug pin 25
black module = ground
would it be this for painless?
grey module to pcm black plug pin 29
red module to pcm red plug pin 25
black module to ground?
lt1350 uses this
grey module to pcm black plug pin 29
blue module to prm red plug pin 25
black module = ground
would it be this for painless?
grey module to pcm black plug pin 29
red module to pcm red plug pin 25
black module to ground?
Last edited by xomega; 03-01-2006 at 03:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
