OneWheelWonder

I have a third brake light on my back windshield in my 92 RS. But it doesnt work. Ive already checked the bulb, and it appears to be fine. The wiring that goes into the light looks fine as well. Any ideas on why it wont work? thanks in advance

Stephen

Does the 3rd brake light wire get voltage, with the hatcj closed? Open, it won't. You would hafta check the contacts on the bottom, at the very rear of the trunk, for voltage.

__________________

17"x9" ROH Snypers (with the correct 3rd gen backspacing, no spacers needed), 275 front/285 rear, no rear seats, 4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors

Home of the STS (Sequential Turn Signal) mod
Photobucket of 1989 Pontiac Trans Am GTA-parting out
GOD Bless America

Al Hasse

He should have the light mounted on the top side of the rear glass (inside), should have 12V whenever the brake is pressed, even with the hatch open - there are no contacts at the rear of the hatch. Sometimes the reflector gets brittle from the heat of the bulb and the contacts don't touch the bulb anymore. I'd go out and check mine, but it's out being serviced...

I've replaced my assembly due to a broken reflector with one from http://www.custom-leds.com/ and haven't had a problem since.

__________________

www.cascadecrew.org