Powering junction block to a no power option camaro
#1
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Fort Worth, Tx
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Sport Coupe
Engine: 305 Carb
Transmission: 7004
Powering junction block to a no power option camaro
Okay I've searched and searched on a way to power up a junction block on my 1985 camaro sport coupe but still can't figure it out. I didn't have any power options so I bought a power door from a junkyard, c238 junction block, new window motor, door lock actutator, and a power harness from an 86 z28. So my question is, how do I get power from the fuse block to the junction block? Any help is appreciated. Thanks.
#2
Supreme Member
iTrader: (5)
Re: Powering junction block to a no power option camaro
Okay I've searched and searched on a way to power up a junction block on my 1985 camaro sport coupe but still can't figure it out. I didn't have any power options so I bought a power door from a junkyard, c238 junction block, new window motor, door lock actutator, and a power harness from an 86 z28. So my question is, how do I get power from the fuse block to the junction block? Any help is appreciated. Thanks.
I could be wrong, its been a long time since i looked at the empty spots on my GTA's fusebox.
#3
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: Powering junction block to a no power option camaro
Check your existing harness... The necessary wire may be taped up in it. If not, go to a J/Y and snip a couple. You need both the orange AND the pink ones. You will run the pink to an ignition-on source and the orange to constant-hot. With fuses, of course, or a breaker, in the case of the power windows.
#4
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Fort Worth, Tx
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Sport Coupe
Engine: 305 Carb
Transmission: 7004
Re: Powering junction block to a no power option camaro
Thanks guys, I will try both methods tonight whn I get off of work. My ac has started to act up and I refuse to ride without my driver side window down and no tint to block the sun. Lol
#5
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Fort Worth, Tx
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Sport Coupe
Engine: 305 Carb
Transmission: 7004
Re: Powering junction block to a no power option camaro
Just took it to the shop and decided to let them do it before I blow something up. Plus I got the spoiler break light wired in also.
Thread
Thread Starter
Forum
Replies
Last Post
1984, 1991, 82, 91, block, camaro, electrical, electricity, gen, generation, install, junction, options, power, vehicle