I have some parts you want!
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
I have some parts you want!
Hey People,
Here is what I have left. That I'm willing to part with anyway.
-------------------------ENGINE DRIVETRAIN-------------------------------
USED> Fuel Rail. 86 fuel rail with 9th injector. No pressure regulator. Rails are in great condition tubes are OK. $40 plus shipping.
USED> Stock GM lower TPI base and runners for 87 and up without 9th injector hole. Mildly ported. Base is red and runners are unpolished aluminum. $90 for both.
USED> Selling for a friend. MSD distributor from a 305 TBI car. Very little use 1.5 years old. Works great. $175
NEW> One oil pump pickup screen for small block chevy with a stock oil pan. Slip on style. $5
USED> One K&N Filter charger for a Camaro or Firebird with any engine built from 98-2002. It is in great shape with no problems , oiled and ready to go. $38 shipped. Part number 33-2118 Retails for $58
USED> One K&N filter charger for a Firebird 85-92 or Camaro 87-92 with the 2.8, 3.1, 5.0, or 5.7 liter engine. In good condition with no problems, oiled and ready to go. Check fitmet for your car though. $25 shipped. Part number E-0890 Retails for $38
USED> Stock steel driveshaft from 700R4 car. May need rebalancing and possibly u-joints. Otherwise looks good with not dents. $25
USED> One Carter Competition AFB Carb. 600 cfm. Part number 9605s. Still shiney should work perfect. Similar to Edelbrock. $110
NEW> Throttle Body bolts. Three sets of cap head/allen head bolt sets for throttle body to plenum mounting. Two sets are stainless steel and one set is black. $10 shipped for each
NEW> Valve cover bolts. Stainless steel Cap/Allen headed bolts for centerbolt heads. Complete with washers new in package. $14 shipped
NEW> Throttle body lever arm for older 86-89 throttle bodies. Zinc coated. $25shipped
Please let me know if there is something you like here. I will be listing some of them on Ebay eventually. I can deal on multiple items and accept some trades. It doesn't hurt to ask about anything so let me know.
Thanx, Remember First come First serve and shipping is extra unless listed. Shipping from Maryland 21015 I can send pics if you are seriously interested.
Here is what I have left. That I'm willing to part with anyway.
-------------------------ENGINE DRIVETRAIN-------------------------------
USED> Fuel Rail. 86 fuel rail with 9th injector. No pressure regulator. Rails are in great condition tubes are OK. $40 plus shipping.
USED> Stock GM lower TPI base and runners for 87 and up without 9th injector hole. Mildly ported. Base is red and runners are unpolished aluminum. $90 for both.
USED> Selling for a friend. MSD distributor from a 305 TBI car. Very little use 1.5 years old. Works great. $175
NEW> One oil pump pickup screen for small block chevy with a stock oil pan. Slip on style. $5
USED> One K&N Filter charger for a Camaro or Firebird with any engine built from 98-2002. It is in great shape with no problems , oiled and ready to go. $38 shipped. Part number 33-2118 Retails for $58
USED> One K&N filter charger for a Firebird 85-92 or Camaro 87-92 with the 2.8, 3.1, 5.0, or 5.7 liter engine. In good condition with no problems, oiled and ready to go. Check fitmet for your car though. $25 shipped. Part number E-0890 Retails for $38
USED> Stock steel driveshaft from 700R4 car. May need rebalancing and possibly u-joints. Otherwise looks good with not dents. $25
USED> One Carter Competition AFB Carb. 600 cfm. Part number 9605s. Still shiney should work perfect. Similar to Edelbrock. $110
NEW> Throttle Body bolts. Three sets of cap head/allen head bolt sets for throttle body to plenum mounting. Two sets are stainless steel and one set is black. $10 shipped for each
NEW> Valve cover bolts. Stainless steel Cap/Allen headed bolts for centerbolt heads. Complete with washers new in package. $14 shipped
NEW> Throttle body lever arm for older 86-89 throttle bodies. Zinc coated. $25shipped
Please let me know if there is something you like here. I will be listing some of them on Ebay eventually. I can deal on multiple items and accept some trades. It doesn't hurt to ask about anything so let me know.
Thanx, Remember First come First serve and shipping is extra unless listed. Shipping from Maryland 21015 I can send pics if you are seriously interested.
Last edited by FIRECHICKEN; 04-10-2007 at 09:39 PM. Reason: Added items
#4
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: I have some parts you want!
As far as the brakes go, I don't really want to seperate them. I was hoping to sell a complete kit but I have not modified a set of spindles yet so... I may split it up in awhile if nobody goes for the whole thing. The lines will probably get sold for $45 plus shipping.
#6
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: I have some parts you want!
Sorry guys the brakes are sold. Check out what else I have here:
https://www.thirdgen.org/forums/post...365-post9.html
https://www.thirdgen.org/forums/post...365-post9.html
Trending Topics
#8
Member
iTrader: (1)
Join Date: Feb 2007
Location: Frankfort,Il (Chicago)
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc Z28
Engine: TPI 5.0
Transmission: 700R4
Axle/Gears: Stock
Re: I have some parts you want!
i want the edelbrock donut gaskets. do you have the bolts for the TPS switch. I broke one off today adjusting it.
#9
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: I have some parts you want!
I have updated my post. Thanks to all who purchased some items from me.
#11
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: I have some parts you want!
Why yes, I do take Pay Pal.
I will PM you with the ID
Thanx.
I will PM you with the ID
Thanx.
#12
Senior Member
Join Date: Nov 2000
Location: Queen Creek, AZ
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula
Engine: 383 HSR
Transmission: 5th 700R4
Axle/Gears: 3.89
Re: I have some parts you want!
Do you have any info on the MSD dizzy? what is the part number is it vac adv or electronic?
#15
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: I have some parts you want!
Hey,
I am almost positive it is electronic since it was on his TBI equiped engine with all it's sophisticated computer controls. I am not sure of the part number either. I will ask him to check it out ans get the number. I would say look up a distruibutor for a 89 TBI 305 engine and that is most likely it.
I'll get back when I have a number.
I am almost positive it is electronic since it was on his TBI equiped engine with all it's sophisticated computer controls. I am not sure of the part number either. I will ask him to check it out ans get the number. I would say look up a distruibutor for a 89 TBI 305 engine and that is most likely it.
I'll get back when I have a number.
#16
Senior Member
Join Date: Nov 2000
Location: Queen Creek, AZ
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula
Engine: 383 HSR
Transmission: 5th 700R4
Axle/Gears: 3.89
Re: I have some parts you want!
ok I'm first in line for the dizzy if its the right one.
#17
Member
Join Date: Feb 2005
Location: Monticello, IL
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Monte Carlo SS Aerocoupe
Engine: 305 H.O.
Transmission: 700-R4
Axle/Gears: 3:73 Posi
Re: I have some parts you want!
Very interested in the Carter Carb!!! Is it electric choke? Vacuum secondaries? How many miles, or length of use? Does it need anything at all before bolting it on? please email me asap at zkeeter@stu.parkland.edu or call me at (217)493-4751. Thanks.
#18
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: I have some parts you want!
OK,
The part number I was given is for a pro billet MSD distributor with a number 8366 on the housing.
Here is the Summitracing.com link to the distributor.
http://store.summitracing.com/partde...5&autoview=sku
The price again is $175 plus shipping. It is not negoatiable. Down anyway.
Let me know who really wants it. I can get shipping quotes if you want them or you can opt to go with a rough guess of $20 to anywhere in the continent.
I was told that this dist. was used for about 2000 miles and about a year. The car was used mostly to go to the local cruise and maybe down the strip once or twice. It's nice and clean. The guy switched to carb and vacume advanced MSD.
As for the carb I still have it available if you want it.
L8R
The part number I was given is for a pro billet MSD distributor with a number 8366 on the housing.
Here is the Summitracing.com link to the distributor.
http://store.summitracing.com/partde...5&autoview=sku
The price again is $175 plus shipping. It is not negoatiable. Down anyway.
Let me know who really wants it. I can get shipping quotes if you want them or you can opt to go with a rough guess of $20 to anywhere in the continent.
I was told that this dist. was used for about 2000 miles and about a year. The car was used mostly to go to the local cruise and maybe down the strip once or twice. It's nice and clean. The guy switched to carb and vacume advanced MSD.
As for the carb I still have it available if you want it.
L8R
Last edited by FIRECHICKEN; 05-08-2007 at 10:05 PM. Reason: Added info
#21
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: I have some parts you want!
First one to come up with $175 plus shipping or more takes it. PM me for my Pay Pal address.
#22
Member
iTrader: (1)
Join Date: Feb 2007
Location: Frankfort,Il (Chicago)
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc Z28
Engine: TPI 5.0
Transmission: 700R4
Axle/Gears: Stock
Re: I have some parts you want!
hey i purchased some other stuff from you before. Thanks it was great parts. will you take 75 for the runners and base?
#23
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: I have some parts you want!
Seeing as your a repeat buyer and the last transaction went smooth especially since you got free stuff . I will take $80 for the pair. That however does not include shipping. Shoot me your zip code again and I can get a quote.
#24
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: I have some parts you want!
I have not gotten a reply from the first person interested in the distributor, so it's first come first serve now. PM me for my Pay Pal and whoever wants it can get it.
#25
Member
iTrader: (1)
Join Date: Feb 2007
Location: Frankfort,Il (Chicago)
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc Z28
Engine: TPI 5.0
Transmission: 700R4
Axle/Gears: Stock
Re: I have some parts you want!
will you take 75.00 for the base and runners? my zip is 60423. i purchased the dounut gaskets from you last month
#26
Senior Member
Join Date: Nov 2000
Location: Queen Creek, AZ
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula
Engine: 383 HSR
Transmission: 5th 700R4
Axle/Gears: 3.89
Re: I have some parts you want!
I totally want it but don't have the extra cash right now so If it's still up for sale in a week or 2 I'll take it.
#27
Member
iTrader: (1)
Join Date: Feb 2007
Location: Frankfort,Il (Chicago)
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc Z28
Engine: TPI 5.0
Transmission: 700R4
Axle/Gears: Stock
Re: I have some parts you want!
60423 frankfort, IL let me know the paypal stuff email me at jcsereiko@comcast.net lets close the deal
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM