WTS: New Comp Cams 280XFI w/112 LSA
10-25-2007, 07:55 PM
#1
WTS: New Comp Cams 280XFI w/112 LSA
I had this 280XFI ground on a 112 LSA/108 ICL instead of the normal 113/109 ICL. Brand new in box camshaft, asking $240. Duration @ .050 230/236 .576/.571 lift with 1.6r. For more detailed specs just ask I have the cam card. Thanks for looking.
11-03-2007, 06:10 AM
#3
Junior Member
Join Date: Aug 2007
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTS: New Comp Cams 280XFI w/112 LSA
i would like more specs on the cam, is it a hyd. roller? will it fit my older 2nd gen (non roller) 383 block? (as i am going with a retro roller kit soon)
11-03-2007, 07:04 AM
#4
Supreme Member
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: WTS: New Comp Cams 280XFI w/112 LSA
Go to comps website to get all the detailed info. Yes its a hyd Roller , no it wont fit. you need a retro hyd roller cam. I would do alot of homework before you dig into a engine.
Trending Topics
11-20-2007, 09:39 PM
#10
Junior Member
iTrader: (6)
Join Date: Apr 2002
Location: Highland Twp MI
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: 383 TPI
Transmission: 700R4 2500 stall
Axle/Gears: 3.70 Moser 9in
Re: WTS: New Comp Cams 280XFI w/112 LSA
I just googled this cams part number to find the lift with 1.5 rockers and it pulled up a TGO thread of yours in april with the same cam saying its sold? Anyways can you give me the specs with 1.5 rockers. Comps website doesnt tell me anything.
11-21-2007, 09:39 AM
#12
Supreme Member
iTrader: (35)
Join Date: Feb 2003
Location: Albuquerque, NM
Posts: 1,229
Likes: 0
Received 3 Likes
on
2 Posts
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: WTS: New Comp Cams 280XFI w/112 LSA
Not true......This cam will fit an older non- roller block. You will need a set of retrofit hydraulic roller lifters. These can be sourced from Comp Cams, Speed-pro and Crane, to name a few. You will also need this cam adapter kit from Lingenfelter
Hydraulic Roller Retro Fit Cam Button Wear Plate Kit L98 SBC Applications
Code:LN0270
Price: $32.95
It's a simple kit. I have run several later model cams for years. It's no big deal.
11-22-2007, 10:27 AM
#13
Supreme Member
iTrader: (35)
Join Date: Feb 2003
Location: Albuquerque, NM
Posts: 1,229
Likes: 0
Received 3 Likes
on
2 Posts
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: WTS: New Comp Cams 280XFI w/112 LSA
One more minor detail. With this adapter, you will run a roller block timing set. Bump to ya......
11-23-2007, 10:35 PM
#14
Re: WTS: New Comp Cams 280XFI w/112 LSA
Cam specs from the cam card per request:
Advertised duration @.006: 280/288
Duration @ .050: 230/236
Lobe lift: .360/.357
Gross lift w/1.6 rocker: .576/.571
Lobe separation angle/intake center line: 112/108
Valve timing @ .050: IVO: 7 BTDC IVC: 43 ABDC EVO: 54 BBDC EVC: 2 ATDC
Advertised duration @.006: 280/288
Duration @ .050: 230/236
Lobe lift: .360/.357
Gross lift w/1.6 rocker: .576/.571
Lobe separation angle/intake center line: 112/108
Valve timing @ .050: IVO: 7 BTDC IVC: 43 ABDC EVO: 54 BBDC EVC: 2 ATDC
12-09-2007, 07:19 PM
#18
Re: WTS: New Comp Cams 280XFI w/112 LSA
wow surprised you still have this...if i wasnt worried so much on valve float i'd snag this cuz i'm thinkin of goin with a XE 230/236 on a 112. Let me see whats goin on here cuz AFR heads i may be getting feature some lightweight valvetrain, minus titanium retainers. it may work out
12-09-2007, 08:01 PM
#19
Re: WTS: New Comp Cams 280XFI w/112 LSA
wow surprised you still have this...if i wasnt worried so much on valve float i'd snag this cuz i'm thinkin of goin with a XE 230/236 on a 112. Let me see whats goin on here cuz AFR heads i may be getting feature some lightweight valvetrain, minus titanium retainers. it may work out
01-04-2008, 08:30 PM
#26
Re: WTS: New Comp Cams 280XFI w/112 LSA
Bump. I still have this cam and will sell it for $200. I also have some PAC 1518 beehive springs that are good for .650" lift that I'll sell for $200 if you need some springs for this cam. I also have titanium retainers for those springs and I'll sell them for $200 as well.
01-21-2008, 11:37 PM
#30
Senior Member
Join Date: Nov 2000
Location: Queen Creek, AZ
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula
Engine: 383 HSR
Transmission: 5th 700R4
Axle/Gears: 3.89
Re: WTS: New Comp Cams 280XFI w/112 LSA
man I wish I had the cash for the springs and retainers what is the best you can do for the springs and retainers.
06-01-2008, 01:34 AM
#35
Member
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: WTS: New Comp Cams 280XFI w/112 LSA
still got the cam?
Thread
Thread Starter
Forum
Replies
Last Post
