[NJ] pre-1986 sbc 350 short block
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
pre-1986 sbc 350 short block
hey everyone, i have a small block chevy 350 short block to sell since i bought a complete engine today. the block is used and i would recommend it be rebuilt. Here is what i know: it's from the 70s, it has 4 bolt mains, was in a 1983 monte carlo turbo hot rod and ran great (previous owner was an old friend), was kept inside a garage for the past 5 years, not sure if it's seized and haven't turned it in fear of messing something up. i've been told these old blocks are stronger. the short block consists of: block, pistons, connecting rods, crank, timing chain and gears, timing chain cover, harmonic balancer, and oil pan. in one of the pictures below i captured the block number for those who wish to research.
this was a honey of a motor when it was running and wish i could keep onto it for a jeep conversion but my car needs to be finished this summer. this engine is a great foundation for a strong motor. additional pictures available!
Price: $200
this was a honey of a motor when it was running and wish i could keep onto it for a jeep conversion but my car needs to be finished this summer. this engine is a great foundation for a strong motor. additional pictures available!
Price: $200
#2
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: pre-1986 sbc 350 short block
bump. forgot to mention the cam is still in there. lifters are in there too. they are non-roller. i think they are solid.
#5
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: pre-1986 sbc 350 short block
bump, make me an offer?
#6
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: pre-1986 sbc 350 short block
bump, price reduced to $150
#7
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: pre-1986 sbc 350 short block
bump! i'd really like to sell this to someone who'll make something great out of it. i'd rather not have to scrap it.
Trending Topics
#8
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: pre-1986 sbc 350 short block
really? no one wants this engine? if no one buys it, it's going to the scrap yard! how about $100?
#9
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: pre-1986 sbc 350 short block
Make me an offer or it's going to the scrap yard. This is my last bump for this engine.
#10
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: pre-1986 sbc 350 short block
i didn't get rid of this yet. i think it would be a waste to just throw it away when it could benefit someone. so BUMP.
#11
Junior Member
Join Date: Dec 2007
Location: Audubon, N.J.
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 .060 over carbed
Transmission: TH-700R4 w/2800 stall
Axle/Gears: 9 bolt w/3.27s till it breaks
Re: pre-1986 sbc 350 short block
where ya located in nj? i live right outside philly, i might be interested
#12
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: pre-1986 sbc 350 short block
yep it's still here! i live in hudson county.
#13
Junior Member
Join Date: Dec 2007
Location: Audubon, N.J.
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 .060 over carbed
Transmission: TH-700R4 w/2800 stall
Axle/Gears: 9 bolt w/3.27s till it breaks
#14
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: pre-1986 sbc 350 short block
a good friend of mine had this in his monte carlo. there was no turbo on this engine, the original engine of his monte did. sorry for the confusion. he didn't do anything internal with it. when i told him i bought it off of a mutual friend of ours he advised me to put domed pistons in it as it is a low compression motor and i told him i wanted it for my GTA. I've since bought another engine for the GTA. This engine is really just a lump of clay for you to mold into whatever you want since it needs to be cleaned up and machined fresh. he had a saginaw 4 speed mated to it so it has a roller pilot bearing in the crank. still has a balancer on it. obviously, it's not drilled for roller lifters since this is pre '86. Along with what i stated in the opening post that's all i know of it. i hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Eric-86sc
Engine/Drivetrain/Suspension Parts for Sale
0
08-24-2015 09:01 PM