[OH] 305 chevy shortblock
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jun 2001
Location: northeast ohio
Posts: 1,878
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000 astro
Engine: 4.3
Transmission: A4
Axle/Gears: 7.5 with 3.42 gears
305 chevy shortblock
Feel free to make an offer! The worst I can say is no!
I'm listing my 305 chevy short block for sale.
I built this engine in 2002 for use in my old 84 Camaro sport coupe. I drove that car a total of 1500 miles, then pulled the engine in 2004 to do a cam swap.
The engine has standard bore cast flat-top pistons, and is built off of a 1981 305 chevy block. It's equivalent to a 305 high output motor like you'd find in a Camaro Z28 or Monte Carlo SS
The crankshaft is the original cast crank, and is standard size. It is a 2 piece rear main seal engine.
The camshaft is Summit Racing part number 1103. The specs are 214 int./224 exh. @.050 lift with .442" int./.465" exh. lift. The cam is brand new.
The engine has a standard volume oil pump.
It's on a stand, oiled, and wrapped in a trash bag. I pull the bag every couple of months and turn it over with the crank socket and oil the cylinders and block.
I'm asking $200 for the shortblock with the engine stand.
Please call 330-240-5486. Leave a message if I do not answer. You can also reply to the ad here.
I can not ship this, but can meet anywhere from Cleveland, Ohio to Pittsburgh, Pennsylvania for fuel expenses. I live in Cortland, Ohio for reference.
I'm listing my 305 chevy short block for sale.
I built this engine in 2002 for use in my old 84 Camaro sport coupe. I drove that car a total of 1500 miles, then pulled the engine in 2004 to do a cam swap.
The engine has standard bore cast flat-top pistons, and is built off of a 1981 305 chevy block. It's equivalent to a 305 high output motor like you'd find in a Camaro Z28 or Monte Carlo SS
The crankshaft is the original cast crank, and is standard size. It is a 2 piece rear main seal engine.
The camshaft is Summit Racing part number 1103. The specs are 214 int./224 exh. @.050 lift with .442" int./.465" exh. lift. The cam is brand new.
The engine has a standard volume oil pump.
It's on a stand, oiled, and wrapped in a trash bag. I pull the bag every couple of months and turn it over with the crank socket and oil the cylinders and block.
I'm asking $200 for the shortblock with the engine stand.
Please call 330-240-5486. Leave a message if I do not answer. You can also reply to the ad here.
I can not ship this, but can meet anywhere from Cleveland, Ohio to Pittsburgh, Pennsylvania for fuel expenses. I live in Cortland, Ohio for reference.
Last edited by robertg; 11-05-2010 at 12:06 AM.
#6
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jun 2001
Location: northeast ohio
Posts: 1,878
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000 astro
Engine: 4.3
Transmission: A4
Axle/Gears: 7.5 with 3.42 gears
Re: 305 chevy shortblock
i need your zip code. it's probably pretty expensive, but i'll get you a quote.
#7
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jun 2001
Location: northeast ohio
Posts: 1,878
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000 astro
Engine: 4.3
Transmission: A4
Axle/Gears: 7.5 with 3.42 gears
Re: 305 chevy shortblock
still available everyone! i need to get my wife a new pair of eyeglasses!
Trending Topics
#8
Senior Member
iTrader: (2)
Join Date: May 2002
Location: Hollywood, FL
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 Black GTA, T-tops, digital dash
Engine: 5.7 TPI w/custom chip
Transmission: 700R4
Axle/Gears: 9 bolt 327 posi
Re: 305 chevy shortblock
Would you ship it and if so, how much to ship to 33175?
#9
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jun 2001
Location: northeast ohio
Posts: 1,878
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000 astro
Engine: 4.3
Transmission: A4
Axle/Gears: 7.5 with 3.42 gears
Re: 305 chevy shortblock
david: i need to know...
do you need/want the engine stand? the crate would be smaller if you didn't want the stand. would save a few $$$ on the shipping.
i also need to know if this would be delivered to a business or residence.
thanks!
do you need/want the engine stand? the crate would be smaller if you didn't want the stand. would save a few $$$ on the shipping.
i also need to know if this would be delivered to a business or residence.
thanks!
#10
Senior Member
iTrader: (2)
Join Date: May 2002
Location: Hollywood, FL
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 Black GTA, T-tops, digital dash
Engine: 5.7 TPI w/custom chip
Transmission: 700R4
Axle/Gears: 9 bolt 327 posi
Re: 305 chevy shortblock
No, I don't need the engine stand and this is a residence. Thanks
Thread
Thread Starter
Forum
Replies
Last Post