[GA] LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
#1
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
***SOLD****
I got a pretty much ready-to-go LS1 front brake swap. Pulled all parts from a 99 Camaro. Rebuilt the calipers after I cleaned, polished and powder coated them red. Factory 89 Calipers were machined down to hub dimensions for hat-style LS1 rotor. Master cylinder, booster, just plumb it up and go. I can throw in the factory 89 knuckle that it's all bolted up to as well.
I have been out of this for so long, so to be honest I don't know what these swaps are going for anymore. I'm trying to pay off some bills from my new born daughter, so don't low ball me please! I don't have pics right now, but can get some in a couple of days if there;'s any interest.
I got a pretty much ready-to-go LS1 front brake swap. Pulled all parts from a 99 Camaro. Rebuilt the calipers after I cleaned, polished and powder coated them red. Factory 89 Calipers were machined down to hub dimensions for hat-style LS1 rotor. Master cylinder, booster, just plumb it up and go. I can throw in the factory 89 knuckle that it's all bolted up to as well.
I have been out of this for so long, so to be honest I don't know what these swaps are going for anymore. I'm trying to pay off some bills from my new born daughter, so don't low ball me please! I don't have pics right now, but can get some in a couple of days if there;'s any interest.
Last edited by spills; 02-17-2013 at 09:41 AM.
#3
Senior Member
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
sell just the hubs ?
#4
Supreme Member
iTrader: (2)
Join Date: Jul 2005
Location: Guilford, Connecticut
Posts: 1,428
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 IROC-Z camaro
Engine: 355 TPI
Transmission: tko 500
Axle/Gears: Dana 44 3.31 posi pbr brakes
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
PM sent
#5
Member
Join Date: Oct 2012
Location: Indianapolis
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 1978 L82 355
Transmission: 700R4
Axle/Gears: 3.23
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
How much for the hubs, spindles, and brackets?
#6
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
Guys, honestly I don't know how much I have in this whole kit, or how much they go for. Shoot me an offer
I'm not parting it out, with the exception of the MS/booster whoever gets the spindles and all does not need it.
I will include SS lines with them as well
I'm not parting it out, with the exception of the MS/booster whoever gets the spindles and all does not need it.
I will include SS lines with them as well
#7
Senior Member
iTrader: (7)
Join Date: Jan 2012
Location: Romney, WV
Posts: 586
Likes: 0
Received 2 Likes
on
1 Post
Car: 89 IROC Z/88 IROC Vert
Engine: 350c.i./305c.i.
Transmission: 700R4/T-56
Axle/Gears: 3.42/4.10
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
Okay, since you can't come up with a price let's try this. For those interested let's do a little bidding. I'll start. Keep in mind this is not my final offer just an opening bid. $125 shipped.
Trending Topics
#8
Supreme Member
Join Date: Dec 2002
Location: Central FL
Posts: 2,564
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Camaro
Engine: 3.1...not hardly stock
Transmission: 700r4....not stock either
Axle/Gears: 3.73
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
whats the rotor diameter?
#9
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
whatever factory LS1 specs are
#10
Senior Member
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
im in for the hubs and the lines $75 shipped
#11
Member
Join Date: Oct 2012
Location: Indianapolis
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 1978 L82 355
Transmission: 700R4
Axle/Gears: 3.23
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
So this includes both front complete takes with spindles?
#13
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
comes with:
LS1 rotors (new but rusty)
pads (new)
LS1 calipers (rebuilt, powdercoated
custom caliper brackets
89 RS rotors turned down into hubs
SS soft lines
89 RS knuckle
LS1 rotors (new but rusty)
pads (new)
LS1 calipers (rebuilt, powdercoated
custom caliper brackets
89 RS rotors turned down into hubs
SS soft lines
89 RS knuckle
#15
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
anyone got an idea how much a loaded knuckle weighs? if not I gotta pull it off the car first before I can give an accurate shipping quote
#16
Supreme Member
iTrader: (2)
Join Date: Jul 2005
Location: Guilford, Connecticut
Posts: 1,428
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 IROC-Z camaro
Engine: 355 TPI
Transmission: tko 500
Axle/Gears: Dana 44 3.31 posi pbr brakes
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
The whole setup is going to be pretty heavy. Id be willing to guess it will cost 50 dollars or there abouts to ship. Could be a bit more too.
Question for you: Who made the hubs? A local shop? How much material is left around the studs? Ive heard this is a common area to fail on the swap.
Question for you: Who made the hubs? A local shop? How much material is left around the studs? Ive heard this is a common area to fail on the swap.
#17
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
I turned the hubs myself at the shop I was working at years ago. Id be more than happy to take some pics/measurements once its off
#18
Member
Join Date: Oct 2012
Location: Indianapolis
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 1978 L82 355
Transmission: 700R4
Axle/Gears: 3.23
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
Both spindles included? just making sure since a "knuckle" would be one.
#19
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
both knuckleS
#20
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
weight of one loaded knuckle (spindle, machined down rotor, LS1 rotor, caliper, bracket, SS line) is right around 55 lbs. Ill get some shipping quotes out to yall sometime today or this evening if you send me your zip if you havent already. If need be, I can disassemble the knuckle and leave the spindle off which I'm sure will help with the weight and shipping savings if some of yall wanted to go that route
#21
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
$250 plus shipping, all PMs responded
#22
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
*pending sale*
#23
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Re: LS1 calipers, brackets, rotors, machines down hubs, M/C, booster
***SOLD****
Thread
Thread Starter
Forum
Replies
Last Post
rudolphschenker
Transmissions and Drivetrain
1
09-04-2015 02:41 AM
IROCZDAVE (88-L98)
Engine/Drivetrain/Suspension Parts for Sale
0
09-02-2015 08:49 AM