IROCZ1989

iTrader: (1)

Hate to part with the super ram motor but Im building something bigger. Engine is a zz4 shortblock with super ram/219 lpe cam/trick flow twisted wedge 180 cc heads with the gold crane 1.5 rockers. Super ram is port matched as well.Hamburger pan, 24lb injectors, and custom modified fuel rails by street and performance to take a 6an inlet and outlet. Its a 10.1 compression engine, it plenty healthy with low miles. Complete engine minus the accesories in the pic like headers and pullys. Here are a few pics:







Would like to sell local more than anything so you can come by and actually see it if desired. but can ship if we come to a deal. One thing, I will not part it out so please dont ask for the super ram seperate. Any questions feel free to pm me. Asking $4000. Great deal considering the shortblock by itself cost around $2700. Drop in tune and go. Take care

UnderCover89TBI

iTrader: (25)

*if you part it out* i would have interest in the cylinder heads.

I hope you can sell it all. Good luck on the sale

IROCZ1989

iTrader: (1)

Thanks for the intrest. I really dont want to part it out as it runs very well. Think about it for yourself. 219 cam will pass the sniffer in CA. And with super ram you can retain the egr. This is an easy 12 sec combo all day long. If I do Ill may sell them complete with the crane gold rollers .Its a good flowing head around 236 on the intake at .500. Plus the 180cc chamber is excellent for a street driven vehicle. Only reason why Im selling is the extra cash will finance the new build. I just love the look of the super ram in a thirdgen. Would you be interested in the long block minus the intake? I know you run a tbi. Lmk thanks

UnderCover89TBI

iTrader: (25)

not interested in anything but the heads.

again good luck with your sale. I know it is a pain to end up having to part stuff out.

IROCZ1989

iTrader: (1)

Bump for sale. Make offers, locals to southeastern MA welcome to stop by. Thanks

IROCZ1989

iTrader: (1)

Bump this up..

rongreen

iTrader: (1)

Is SR matched to a Fel Pro gasket if so what #. I have an interest in a complete SR if you decide to go that route.

IROCZ1989

iTrader: (1)

Aa of right now I have no plans to part out anything. The super ram is port matched to a 1205. And the runners are port matched to plenum and base as well. Lmk if you are interested in whole motor. Take care

Podium

iTrader: (2)

That is a really good deal!

IROCZ1989

iTrader: (1)

It is. Anyone local came stop by to look if interested. Local pickup perferred, but will deal and ship anywhere in us. Take care

IROCZ1989

iTrader: (1)

Nice setup with a complete super ram and injectors. Just drop in your own dis and tune and go. Easy low 12 sec combo all day. Its killing me to sell this super ram setup but Im buikdint something alot bigger na and need to finish that project. Take care.

Bump for sale

IROCZ1989

iTrader: (1)

Bump

galletti

Hi,
I know you weren't planning on parting out but, you have a taker on the SR, another on the heads, and, for the right price, I'm in for the short block. Any thoughts?

IROCZ1989

iTrader: (1)

Sorry I missed your post. I really didnt want to part this out but if I have to I may or may not sell the super ram. If you want the short block it will basically be comming more complete than a zz4 one. Youll get the cam, lifters, oil pan and such etc. Shoot me an offer. I will only part out if you and the other party is in on the heads as well dont want to start splitting up a running motor than have people back out of the deal. Lmk we can work something out. Take care

IROCZ1989

iTrader: (1)

All pm responded too . You can also email me at darrvan@msn.com
If any interested buyers want to speak with me on the phone or stop by the house if your in the area pm me for my info and we can set up a time. Take care.

IROCZ1989

iTrader: (1)

Bunp this up again.

IROCZ1989

iTrader: (1)

Bump for sale. Thanks

IROCZ1989

iTrader: (1)

Bump this up as I havent heard from any buyers that I sent requested info too.. Take care...

IROCZ1989

iTrader: (1)

Need this sold. Make resonable offers. Open to parting out. Serious parties only. Thanks and take care

89stkformula

iTrader: (1)

That's a very nice engine Just so happens my 305tpi bit the big one today. I going to pm you my info so we can talk.

IROCZ1989

iTrader: (1)

Bump this back up. This is a nice swap motor for anyone with a tired tpi. If you want to keep your own intake I can sell just the long block. For what they charge to build motors today this deal cant be beat. Take care

IROCZ1989

iTrader: (1)

Bump up for sale

rdchaplin

PMed you

DeltaElite121

Willing to do a package deal on the heads and the complete intake? My buddy wants a nice setup for his Vette, and this would be a great way to get the "big two" taken care of. PM me what you're wanting for them (as well as individual prices) and I'll talk to him about it.

IROCZ1989

iTrader: (1)

Rdchaplin, i have no pm in my inbox can you resend?
Delta as much as I would love to sell you the parts I really dont want to part it out. Why dont you just buy the whole motor? I really have no use for a 355 shortblock. Make me an offer

Podium

iTrader: (2)

Pm sent

IROCZ1989

iTrader: (1)

Pm'd you back with my contact info. Lmk. Take care

DeltaElite121

He wants to build a 383 (he bought a block from me), otherwise he'd be ALL over it. I showed him the link. Definitely a sweet deal for a complete package. I understand you not wanting to part it out, though. That can be a pain to deal with, heh.

IROCZ1989

iTrader: (1)

Hi. Well have your friend think about it. To be honest with these heads 180cc on a hot 383 would be a tad small. But for this motor everything is matched and works well together. Your prob looking at 30-40 ftlbs difference between a 383-355. Something to think about. Have your friend reserch this combo on corvette forum, in the lighter vette your looking at low 12s hight 11s all day. Super ram and 219 cam is a stout performer.

Im bumping this up again. Have not heard anything from the pms I responded back to. Take care all

IROCZ1989

iTrader: (1)

Bump this up again. All pms responded to. Take care

DiabolicalRS

2700 bucks for it obo?

rongreen

iTrader: (1)

What is the status of the Super Ram are you going to sell it?

IROCZ1989

iTrader: (1)

Status is aim waiting on two to get back to me on the motor. If I split things up this makes the .otor less desirable for sale. If someone wants the long block I will sell you the super ram. Diabolical if you want the long block at that price we can do that, for the complete motor I cant let it go that low sorry. Take care all

IROCZ1989

iTrader: (1)

Bump this up again for sale. Please only serious buyers only. Alot of pms but no responses back. Thank you and take care all.

2slow5.0

iTrader: (2)

I wish this were a year earlier. I just built a similar setup and can attest that that engine can not be built for that money. this would have saved me considerable time and money This is a GOOD DEAL

IROCZ1989

iTrader: (1)

Thank you for chiming in. After this motor and previous combos and now with the 421 Im putting together I know you can agree just machine work and parts are expensive now. The small stuff adds up. Really to build this engine new now your looking at $7500-8500 depending on parts. Would definatly like to get this gone so I can get my 421 done faster. Anyone looking for a combo like this go to a QUALITY machine shop/builder and do a price search on all parts listed. And get a round about cost, double what Im asking thats about what youll pay.You will save alot doing it this way. Basically throw your distributor in, get chip burnt, done it will run. Easy.... Thanks all and take care

2slow5.0

iTrader: (2)

that is about rite. and I bought most of my parts used. 1500 for a used short block. 800 for new pistons. 500 for used heads. 2500 for machine shop. 350 for a pan. 850 for a used super ram. ect ect ect.

IROCZ1989

iTrader: (1)

Bump for sale... Thank you

IROCZ1989

iTrader: (1)

Bump for sale

Justin89Formy

iTrader: (26)

I ended up parting my motor out. Once I did, I had everything sold in 48 hours. Just food for thought

IROCZ1989

iTrader: (1)

Did you sell the miniram? Looking for a miniram 1206 for my 421. I know I may have to part out. I just hate doing that. If I get a few interested parties. Heads shortblock and intake I will. I can sit on a set of heads or an intake, not a shortblock though. I got my 421 comming soon and have my tahoes 383 here as well. No room for it. Thanks for the heads up though.

Justin89Formy

iTrader: (26)

sold the short block heads miniram and throttle body all seperate very quick

IROCZ1989

iTrader: (1)

Thanks for the heads up. Well if anyone want the heads with the crane gold rollers they are for salw. Make me an offer. I have someone right now that wants the super ram. So it all depends on if i sell the heads or not. Thanks

DeltaElite121

You should be able to sell those fairly quickly. There's always people looking for good cylinder heads.

IROCZ1989

iTrader: (1)

bump up for sale

cattiveria665

iTrader: (1)

Any interest in trading for a 99 Vette LS1 with GTO harness and 48,000 miles? any specs on the motor in terms of tq and hp?

IROCZ1989

iTrader: (1)

Thanks for the offer, but the last thing I need in my garage is another motor. I have my Tahoes 383, the old tahoe 350, this 355 and soon Ill have to make room for the 421. I dont have specs per say hp amd torque but if I had to guess Id say at least 420 to the crank. I went 12.60 with a bone stock 9lb boosted tpi and this feels faster. Def a solid mid to low 12 engine all day. Take care.

cattiveria665

iTrader: (1)

Ok bro thanks for the response the ls is the only thing I'm working with at the moment. Good luck with the sale buddy

IROCZ1989

iTrader: (1)

Bump again

IROCZ1989

iTrader: (1)

Bump up for offers ..
take care