[OH] Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
04-29-2013, 12:24 PM
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2011
Location: OH
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Camaro
Engine: 4.8, ls9 cam, mpt76
Transmission: Built 4l60e, 3600 stall TC
Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
Had this up in the classifieds for a while with no luck as a complete "project" car so I'll see what I can get if i part it out.
Engine *can hear run for time being!*
4.8
ARP rod bolts
LS9 cam (different front cover)
LS6 valve springs
Truck intake
f-body oil pan
ported ls6 oil pump
Royal Purple oil
Complete engine $1100 picked up
Transmission
Built 4l60e
two transmission coolers
3500 stall converter
$1200 OBO picked up
Or $300 for stall converter and $1000 for trans with stock converter
OR $2200 OBO for engine and transmission
2002 SS Camaro rear end with 3.73 gears posi disc
$320 OBO picked up
"LS1 Big Brake Upgrade" in the front
All new shocks (KYB) and springs.
WS6 sway bars
all new poly bushings
$500 for everything- pending on just brake setup and shocks
Turbo Components
Master Power T76 turbo
Tial 44mm WG
HKS SSQV BOV
4 inch intercooler
2.5 inch cold/hot side piping
3 inch down pipe and 3 inch exhaust
ALL for $1900 OBO
Apexi AVCR Boost controller-- sold
Interior
Fourth gen dashboard, dash pad (cut for third gen) and center console
$275 OBO
fourth gen leather seats
$400 for front and back
Old style pillar pod that replaces stock one
$70 shipped
Exterior
4 inch steel cowl hood with some dents on the corners
$200 OBO
If I can sell the car as a roller I would prefer that, because I have por-15'ed it and fat matted the whole interior. I will sell the roller with all new suspension components, ws6 sway bars, ls1 big brake upgrade, 2000 Camaro ss rear end with 3.73 gears posi disc, and full interior for $2100 OBO
OR, the whole car for $5500 as it sits now, running and needing a tune.
Car now has stock red cloth seats as I have removed the grey leather ones for sale
**Everything is sold AS IS. I am not responsible for any damage caused to your car or yourself after purchase**
Engine *can hear run for time being!*
4.8
ARP rod bolts
LS9 cam (different front cover)
LS6 valve springs
Truck intake
f-body oil pan
ported ls6 oil pump
Royal Purple oil
Complete engine $1100 picked up
Transmission
Built 4l60e
two transmission coolers
3500 stall converter
$1200 OBO picked up
Or $300 for stall converter and $1000 for trans with stock converter
OR $2200 OBO for engine and transmission
2002 SS Camaro rear end with 3.73 gears posi disc
$320 OBO picked up
"LS1 Big Brake Upgrade" in the front
All new shocks (KYB) and springs.
WS6 sway bars
all new poly bushings
$500 for everything- pending on just brake setup and shocks
Turbo Components
Master Power T76 turbo
Tial 44mm WG
HKS SSQV BOV
4 inch intercooler
2.5 inch cold/hot side piping
3 inch down pipe and 3 inch exhaust
ALL for $1900 OBO
Apexi AVCR Boost controller-- sold
Interior
Fourth gen dashboard, dash pad (cut for third gen) and center console
$275 OBO
fourth gen leather seats
$400 for front and back
Old style pillar pod that replaces stock one
$70 shipped
Exterior
4 inch steel cowl hood with some dents on the corners
$200 OBO
If I can sell the car as a roller I would prefer that, because I have por-15'ed it and fat matted the whole interior. I will sell the roller with all new suspension components, ws6 sway bars, ls1 big brake upgrade, 2000 Camaro ss rear end with 3.73 gears posi disc, and full interior for $2100 OBO
OR, the whole car for $5500 as it sits now, running and needing a tune.
Car now has stock red cloth seats as I have removed the grey leather ones for sale
**Everything is sold AS IS. I am not responsible for any damage caused to your car or yourself after purchase**
Last edited by 4.8camaro; 05-02-2013 at 07:30 PM. Reason: more pics added
04-29-2013, 03:34 PM
#2
Senior Member
iTrader: (9)
Join Date: Jun 2002
Location: La Mirada, California
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: L98 350 TPI
Transmission: 700R4
Axle/Gears: ZT LSD with 3.42 - LS1 brakes
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
I might be interested in the LS1 front brake setup if you are willing to seperate from the bundle... and cost of shipping to 90638... 
04-29-2013, 10:01 PM
#3
Member
iTrader: (2)
Join Date: Jan 2006
Location: Ettrick WI
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
wish you were closer on the motor and tranny
Last edited by stealthram92z; 04-30-2013 at 07:37 AM.
04-29-2013, 10:52 PM
#4
Junior Member
Join Date: Aug 2009
Location: Norton,KS
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro base model
Engine: 350ci
Transmission: 700r4 (t56 hopeful)
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
Are you selling the door panels?
04-30-2013, 06:42 PM
#6
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2011
Location: OH
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Camaro
Engine: 4.8, ls9 cam, mpt76
Transmission: Built 4l60e, 3600 stall TC
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
Cmmcginnis I can. Make an offer
04-30-2013, 07:08 PM
#7
Member
Join Date: Oct 2012
Location: Indianapolis
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 1978 L82 355
Transmission: 700R4
Axle/Gears: 3.23
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
Interested in rear end. Do you have photos of it alone?
Trending Topics
05-01-2013, 04:23 AM
#9
Member
iTrader: (2)
Join Date: Aug 2004
Location: Eastgate/Cincy Ohio
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS
Engine: ZZ4
Transmission: T-5
Axle/Gears: 3.73
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
What part of Ohio? Interested in a few parts...
05-01-2013, 06:42 AM
#10
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2011
Location: OH
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Camaro
Engine: 4.8, ls9 cam, mpt76
Transmission: Built 4l60e, 3600 stall TC
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
Akron ohio
05-02-2013, 07:31 PM
#11
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2011
Location: OH
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Camaro
Engine: 4.8, ls9 cam, mpt76
Transmission: Built 4l60e, 3600 stall TC
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
more pics added.. injectors pending, brake setup pending. still have front ws6 sway bar
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
The_Phoenix
Engine/Drivetrain/Suspension Parts for Sale
7
09-03-2015 10:56 PM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
08-08-2015 08:16 PM
