Heads, Cam and rockers
#1
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: medina, ohio
Posts: 236
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
Heads, Cam and rockers
All parts have maybe 5k miles. Great combo if someone wants to make great power for the street. Items are still on the running TPI motor. Have the receipt for proof on all items. Only thing changed since this picture taken some time ago is the intake itself. The motor has been babied mainly because it is only driven at most 500 miles a year or less and the wife drove it to work most of those times.
Comp Cam, pn CL08-305-08. Cam and lifters. Lists at $505. $350 shipped.
Trick Flow pushrods, pn 21407200. List out at $100.
TrickFlow 23 degree heads. Single spring good for 0.540" lift. The last link is the original link for the heads. Trick Flow kept the same design, but now changed them to 'Fast-as-Cast'. ARP headbolts to go with them and they list at $82. Head pn. TFS-30410006. thinking $1000 shipped for those. That's $500 a piece, with ARP head bolts, no tax and FREE shipping.
Crane Gold Race roller rockers, 1.5 ratio, narrow body to fit the center bolt heads. They list about $400. Good for upto 700# open spring pressure! $300 shipped for FREE.
Set of FMS red top 30# injectors. Good condition. $130 shipped. SOLD
Nearly new set of 70# EV1 injectors. Under warranty for 2 months yet. $175 shipped
Shoot me a pm if someone has any interest. Motor to be pulled this winter. Going a different route. These parts are 'used', but have very little use overall. Please don't expect to pay 1/2 of what they list for, as I would keep them and use them on another build. If you're local, you are more than welcome to come hear it run until the end of December. Reasonable offers please. Thanks, Chris.
http://www.compcams.com/Company/CC/c...?csid=214&sb=2
http://www.summitracing.com/parts/cca-cl08-305-8
http://www.summitracing.com/parts/tfs-21407200
http://www.summitracing.com/parts/ARP-134-3601
http://www.summitracing.com/parts/cr...make/chevrolet
http://www.summitracing.com/parts/tf...make/chevrolet
http://www.tlfperformanceparts.com/C...--R-672-8.html
Comp Cam, pn CL08-305-08. Cam and lifters. Lists at $505. $350 shipped.
Trick Flow pushrods, pn 21407200. List out at $100.
TrickFlow 23 degree heads. Single spring good for 0.540" lift. The last link is the original link for the heads. Trick Flow kept the same design, but now changed them to 'Fast-as-Cast'. ARP headbolts to go with them and they list at $82. Head pn. TFS-30410006. thinking $1000 shipped for those. That's $500 a piece, with ARP head bolts, no tax and FREE shipping.
Crane Gold Race roller rockers, 1.5 ratio, narrow body to fit the center bolt heads. They list about $400. Good for upto 700# open spring pressure! $300 shipped for FREE.
Set of FMS red top 30# injectors. Good condition. $130 shipped. SOLD
Nearly new set of 70# EV1 injectors. Under warranty for 2 months yet. $175 shipped
Shoot me a pm if someone has any interest. Motor to be pulled this winter. Going a different route. These parts are 'used', but have very little use overall. Please don't expect to pay 1/2 of what they list for, as I would keep them and use them on another build. If you're local, you are more than welcome to come hear it run until the end of December. Reasonable offers please. Thanks, Chris.
http://www.compcams.com/Company/CC/c...?csid=214&sb=2
http://www.summitracing.com/parts/cca-cl08-305-8
http://www.summitracing.com/parts/tfs-21407200
http://www.summitracing.com/parts/ARP-134-3601
http://www.summitracing.com/parts/cr...make/chevrolet
http://www.summitracing.com/parts/tf...make/chevrolet
http://www.tlfperformanceparts.com/C...--R-672-8.html
Last edited by sparks454; 03-31-2015 at 03:52 PM.
#4
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: medina, ohio
Posts: 236
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
Re: Heads, Cam and rockers
That's why my ad shows to send me a PM if you are interested. I am open to offers. You have PM.
#6
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: medina, ohio
Posts: 236
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
Re: Heads, Cam and rockers
Last chance for the engine parts. If I separate the items, I would like the cam/lifters/rockers to go together possibly and the heads separate. I also have a PowerFlow 58mm TB for sale. It does not come with the IAC piece on the bottom, so you would have to transfer yours. It has a couple linkage adapters for the throttle. It was used for only 5 runs and is like new. It does have a wear mark above the throttle speed screw(you can see it in the picture) from it rubbing on the underside of the hood. Would like $235 shipped for it. Fits most TPI motors including LT1's. Thanks, Chris.
http://www.ebay.com/itm/Professional-Products-Throttle-Body-58mm-Polished-Cast-Aluminum-Chevy-Pontiac-EA-/331340570963?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d256fe153&vxp=mtr#ht_1433wt_984
http://www.ebay.com/itm/Professional-Products-Throttle-Body-58mm-Polished-Cast-Aluminum-Chevy-Pontiac-EA-/331340570963?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d256fe153&vxp=mtr#ht_1433wt_984
Last edited by sparks454; 10-28-2014 at 07:49 PM.
Trending Topics
#8
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: medina, ohio
Posts: 236
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
Re: Heads, Cam and rockers
Have a set of FMS Red Top 30# injectors as well. Shipped $130. Lightly used.
Final price reduction on the below items. Can hear it run til end of December.
Heads and head bolts..$950 plus paypal shipped to the U.S.
Cam and lifter kit $300 plus paypal shipped.
Rockers $300 plus paypal shipped.
Pushrods are $75 alone or $50 added to any of the above.
PM me if interested. I have sold parts here before and I also have 100% on ebay. ID is clehman454. Thanks, Chris.
Final price reduction on the below items. Can hear it run til end of December.
Heads and head bolts..$950 plus paypal shipped to the U.S.
Cam and lifter kit $300 plus paypal shipped.
Rockers $300 plus paypal shipped.
Pushrods are $75 alone or $50 added to any of the above.
PM me if interested. I have sold parts here before and I also have 100% on ebay. ID is clehman454. Thanks, Chris.
Last edited by sparks454; 12-15-2014 at 01:53 PM.
#12
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: medina, ohio
Posts: 236
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
Re: Heads, Cam and rockers
Yes. They are still on the motor under the stock, centerbolt covers. They are good for 700# open spring pressures.
Last edited by sparks454; 11-20-2014 at 12:41 PM.
#13
Re: Heads, Cam and rockers
I just bought a bone stock 5.7 iroc and im going to modify over the winter . Cam , heads etc.. little fun for the street .. I live in strongsville .. if I get a chance ill give you a call over the weekend..
#14
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 02:45 PM