[TN] 730ecm
10-17-2015, 11:09 PM
#1
Member
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Bolivar, TN
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 GTA
Engine: 350
Transmission: 700R4
Axle/Gears: 3.27
730ecm
Tuning and turbo ECM and RePin stuff
Includes all of the following:
1 x S3 Aries 32-Pin ZIP Socket
1 x EX 6-Foot Rotary DIP Extension w/LED
1 x G3 Bank Switching Adapter
1 x APU1 AutoProm USB
1 x HDR1 Memcal Header
1 x USB Cable
Package $200 Shipped for the Above- SOLD!!!!
1 x '730 ECM
1 x '730 ECM Memcal w/EEPROM
1 x Set of ECM Sockets for Re-Pinning
1 x 2-Bar MAP Sensor w/pigtail
1 x ALXY PROM
1 x ATSX PROM
1 x ABWW PROM
Package - $75 Shipped ALL working condition
1 x Hypertech Custom Chip for 89 350 TPI(Part # 128922) - $50 Shipped - SOLD!!!!
The 730 ECM Memcal w/EEPROM has a tune on it from another member who had a remote mount setup. This setup was stock pushing 5 psi and he put down 327hp and 450ft-lb through a 6 speed.
He did this by repinning this 730 to a 749.
His quote to me
"If you pin everything correctly, and you swap out to 30lb SVO injectors, the ECM I would send you should be able to start and run your car. You will have to adjust it for your car. I have a t56 6-speed in mine too, so you will need to change the speed sensor section too. It is also setup for a Narrow Band O2, so you can run the ECM off of the narrow band output from the wide band sensor for now. I think there is a hack for wide band in the '749 code"
I purchased this years ago and never ended up doing the remote mount setup lol still have the turbo and everything in the basement.
I am going ls now and no longer need this. So selling its. Will post up pictures tomorrow.
Price Listed above
Questions let me know
Includes all of the following:
1 x S3 Aries 32-Pin ZIP Socket
1 x EX 6-Foot Rotary DIP Extension w/LED
1 x G3 Bank Switching Adapter
1 x APU1 AutoProm USB
1 x HDR1 Memcal Header
1 x USB Cable
Package $200 Shipped for the Above- SOLD!!!!
1 x '730 ECM
1 x '730 ECM Memcal w/EEPROM
1 x Set of ECM Sockets for Re-Pinning
1 x 2-Bar MAP Sensor w/pigtail
1 x ALXY PROM
1 x ATSX PROM
1 x ABWW PROM
Package - $75 Shipped ALL working condition
1 x Hypertech Custom Chip for 89 350 TPI(Part # 128922) - $50 Shipped - SOLD!!!!
The 730 ECM Memcal w/EEPROM has a tune on it from another member who had a remote mount setup. This setup was stock pushing 5 psi and he put down 327hp and 450ft-lb through a 6 speed.
He did this by repinning this 730 to a 749.
His quote to me
"If you pin everything correctly, and you swap out to 30lb SVO injectors, the ECM I would send you should be able to start and run your car. You will have to adjust it for your car. I have a t56 6-speed in mine too, so you will need to change the speed sensor section too. It is also setup for a Narrow Band O2, so you can run the ECM off of the narrow band output from the wide band sensor for now. I think there is a hack for wide band in the '749 code"
I purchased this years ago and never ended up doing the remote mount setup lol still have the turbo and everything in the basement.
I am going ls now and no longer need this. So selling its. Will post up pictures tomorrow.
Price Listed above
Questions let me know
Last edited by bigjay89gta; 03-10-2016 at 08:42 PM. Reason: Updated sold parts
10-17-2015, 11:11 PM
#2
Member
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Bolivar, TN
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 GTA
Engine: 350
Transmission: 700R4
Axle/Gears: 3.27
Re: AUTOPROM AND FULL TUNING EQUIPMENT TURBO!!!
Hypertech chip
Everything
730 with the MEMCAL w/ EEPROM
Last edited by bigjay89gta; 10-17-2015 at 11:47 PM.
10-19-2015, 03:26 PM
#3
Member
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Bolivar, TN
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 GTA
Engine: 350
Transmission: 700R4
Axle/Gears: 3.27
Re: AUTOPROM Tuning package 730ecm
OBO shoot me an offer need to order swap brackets and clam shells, t56 cross member 
10-23-2015, 07:57 AM
#4
Member
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Bolivar, TN
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 GTA
Engine: 350
Transmission: 700R4
Axle/Gears: 3.27
Re: AUTOPROM Tuning package 730ecm
Willing to separate stuff if need as well. Just let me know.
Ill do $350 shipped obo as it will probably be around $20-30 to ship because of box size...
Ill do $350 shipped obo as it will probably be around $20-30 to ship because of box size...
Trending Topics
01-04-2016, 08:49 AM
#10
Junior Member
Join Date: Feb 2013
Location: chambersburg͵ pa
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Iroc. 12.60@ 107. 1.72 60'
Engine: 350 paxton sn93 36lbs injectors
Transmission: 700r4
Axle/Gears: 9in. 390s
01-21-2016, 01:47 PM
#13
Member
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Bolivar, TN
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 GTA
Engine: 350
Transmission: 700R4
Axle/Gears: 3.27
Re: AUTOPROM Tuning package 730ecm
No body looking into tuning? The APU1 is $375 new alone this has nice add ons
03-07-2016, 05:31 PM
#16
Junior Member
Join Date: Feb 2013
Location: chambersburg͵ pa
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Iroc. 12.60@ 107. 1.72 60'
Engine: 350 paxton sn93 36lbs injectors
Transmission: 700r4
Axle/Gears: 9in. 390s
Re: AUTOPROM Tuning package 730ecm
What's all the different memcals for? I'd be interested in ecm and everything but apu1 already have apu1.
03-10-2016, 07:21 AM
#17
Junior Member
Join Date: Aug 2008
Location: Niagara Falls area
Posts: 27
Received 0 Likes
on
0 Posts
Car: 86 firebird se/91 camaro rs
Engine: 350
Transmission: 700R4
Axle/Gears: 3:73/3:42 4th gen
Re: AUTOPROM Tuning package 730ecm
How much for just the apu-1 shipped to zip code 14120 in ny
03-10-2016, 08:22 AM
#18
Member
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Bolivar, TN
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 GTA
Engine: 350
Transmission: 700R4
Axle/Gears: 3.27
Re: AUTOPROM Tuning package 730ecm
$200 Shipped will include the following
1 x S3 Aries 32-Pin ZIP Socket
1 x EX 6-Foot Rotary DIP Extension w/LED
1 x G3 Bank Switching Adapter
1 x APU1 AutoProm USB
1 x HDR1 Memcal Header
1 x USB Cable
So everything except the ECM MEMCALS and MAP Sensor
1 x S3 Aries 32-Pin ZIP Socket
1 x EX 6-Foot Rotary DIP Extension w/LED
1 x G3 Bank Switching Adapter
1 x APU1 AutoProm USB
1 x HDR1 Memcal Header
1 x USB Cable
So everything except the ECM MEMCALS and MAP Sensor
03-10-2016, 07:16 PM
#20
Member
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Bolivar, TN
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 GTA
Engine: 350
Transmission: 700R4
Axle/Gears: 3.27
Re: AUTOPROM Tuning package 730ecm
Sold AUTOPROM and Hypertech chip only the 730 ECM left...
Thread
Thread Starter
Forum
Replies
Last Post
ZZman
Engine/Drivetrain/Suspension Parts for Sale
11
04-12-2009 09:28 PM
onebinky
Engine/Drivetrain/Suspension Parts for Sale
7
05-26-2006 09:51 PM