tarheel

looking for a manifold off of a 5.0 liter HO equipped camaro/TA. Must be the factory manifold. Not interested in aftermarket.

Please send pics if possible.

thx,
Greg

dave mc

iTrader: (62)

I have one I removed form a 84 305HO 15.00 bucks + shipping.

tarheel

you have great feedback so i trust it's a genuine HO manifold...right?

let me know the total with shipping to zip 27343. It's North Carolina.

If you take paypal, shoot that information as well and i'll get the funds to you ASAP!
Thx,
Greg

dave mc

iTrader: (62)

I will get the part number off of it and double check I have to weigh it tomorrow and measure it anyway.

Apeiron

LG4s use the same manifold.

tarheel

i always understood the L69 option included a higher performance aluminum intake. They should fit the same, but designed different from the LG4.

I have an LG4 which is fine, i'm just trying to add some HO parts.

Apeiron

They're both P/N 14057054, except in 87 when it was 14101073.

dave mc

iTrader: (62)

The part number is #14057053 if you look under that number you will see GM CFM 20. On the Lg4 it will say GM CFM 16 but will use the same part number.
But anyway $31.67 shipped

dave mc

iTrader: (62)

I have 3 305 4bbl engines I pulled out of cars 2 of them are Ho motors one form a 84 camaro 5 speed car and one form an auto they both say cfm 20. The third is out of a 85 camaro sport coupe it has the same part number but says cfm 16. I called a friend of mine that has a mint low mileage unmolested 84 berlineta and his has the same part number and says cfm 16. If your looking for an original 84 intake form a ho car I have it. Other them that I know nothing if somebody can tell me what the deferens is I’d like to know myself?

JamesC

iTrader: (5)

This from the FAQ and five7kid:

"All US-delivered carb'd V8 3rd gens had an aluminum intake manifold - and they were the same part whether LG4 or L69 (except the '87 LG4, which had the center two mount bolts on each side at a different angle than the rest - '86-earlier were all the same angle)."

My old LG4 was equipped with the alum manifold.

JamesC

John in RI

iTrader: (167)

These are all 82-86 Aluminum intakes with the same part number. The intake with raised "ribs' on ports 2-3-5-8 is about 1 pound heavier than the other 2. ( I removed ALL the fittings before wieghig each. )


Which one was factory installed on the L69 HO ??