Vachaun22

iTrader: (3)

Looking for the AIR diverter valve mounting bracket. It would mount on the passenger side of the engine behind the alternator on and on the front most exhaust manifold stud. This will be for the 305 with carb.

Will get pictures of what I am looking for hopefully later today

stealtht/a

iTrader: (1)

I have a complete emissions system from an 86 lg4 TA.
Anything else you need?

Vachaun22

iTrader: (3)

Do you have pictures?

How about the elbow tube that goes from the air filter down to the passenger side valve cover? Not sure what this is since I thought the PCV was on the driver side.

stealtht/a

iTrader: (1)

Not quite as complete as I thought.I don't have any of the metal tubing, but do have most of the rubber hoses. I think I have the bracket, but it's in a box full of brackets so not sure which it is. Anyone have a pic?
Here's a pic of the rest of it.

Vachaun22

iTrader: (3)

Wish I'd had been able to contact you a while ago when I was looking for all of this stuff. I have the AIR pump at this point, and the vacuum canisters as well.

But I would need the rubber hose that goes up to the diverter valve, the diverter valve mounting bracket, a working diverter valve, and the hoses that run to the injection pipes in the exhaust.

I did get a set of new injection pipes for the exhaust manifolds, so no need for them.

I will see if I can get a picture of the bracket on the engine for my 86 this out for paint right now.

Vachaun22

iTrader: (3)

Finally got time to upload these pictures since I was in the process of moving. These are pictures of the diverter valve mounting bracket and whatnot that I am looking for.

Now in Maryland. I need to update my profile.

dixie wrecked

iTrader: (6)

Aw heck, I have that. I just removed all the emissions crap from my 87, the whole shebang.
I've definitely got that bracket, plus the diverter valve and those hoses.
I'll snap some pics here when I get to my shop.

wwe442

iTrader: (2)

I'm in PA, have an 86 for parts

Vachaun22

iTrader: (3)

Dixie Wrecked, I would be curious as to whether they are the same. If it's a carbed 87, I might be in luck.

wwe442, I'm in MD now. But my cars are both still in PA.

dixie wrecked

iTrader: (6)

Mine is a tpi, I'd figure the mounting brackets and such would be the same. I had a carb'd 86 that had emissions, they looked the same from what I remember. I just dug though my box o' spare parts and found what I pulled off, I'll take pics of all I found

wwe442

iTrader: (2)

Where abouts in PA? I'm near Boyertown

Vachaun22

iTrader: (3)

wwe442, near williamsport.

and still looking for basically any emissions parts for an '86 TA with carb except the air pump itself.

wwe442

iTrader: (2)

Probably about 2:30 away or so. I should have all the emissions parts from the 86 I have, can you send me a list of the individual parts you need and I can get you a price? PM me if possible, or email me wwe442@aim.com. Can ship as well. Thanks!

John in RI

iTrader: (167)

Pretty sure you need the style on the Left,......






If your still looking and need a more info just send me a PM.

Vachaun22

iTrader: (3)

Correct, the system on the left is what i am looking to build. I have the air pump already on the car (no belt, and really not driving the car anyway at this point).

I have the bracket for the diverter valve now, but wouldn't mind having another one.

I know I have some other parts at the house where the car is right now, but it will be a few weeks till I can look at those parts and figure out what I have.