[MI] Want to Buy 3.08 or 3.23 10 Bolt Rear End
12-01-2020, 02:04 PM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: Holly, MI
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 Camaro
Engine: 4.3L V6
Transmission: T5
Axle/Gears: 2.73
Want to Buy 3.08 or 3.23 10 Bolt Rear End
I'm looking for a 10 bolt with either 3.08 or 3.23 gears. It should be mostly complete (gears, diff, cover, axles, backing plates) the more complete the better though. Drum brakes and open diff is fine, Torsen would be a bonus, but I'll also consider a clutch type posi if the price is right. 28 spline (88 or newer) greatly preferred.
Thanks!
Thanks!
12-06-2020, 05:49 PM
#2
Re: Want to Buy 3.08 or 3.23 10 Bolt Rear End
I'm looking for a 10 bolt with either 3.08 or 3.23 gears. It should be mostly complete (gears, diff, cover, axles, backing plates) the more complete the better though. Drum brakes and open diff is fine, Torsen would be a bonus, but I'll also consider a clutch type posi if the price is right. 28 spline (88 or newer) greatly preferred.
Thanks!
Thanks!
12-16-2020, 01:54 AM
#3
Junior Member
iTrader: (3)
Join Date: Dec 2006
Location: Detroit Mi
Posts: 52
Received 0 Likes
on
0 Posts
Car: 86 Z
Engine: 400 sbc
Transmission: t-56
Axle/Gears: 4.10
Re: Want to Buy 3.08 or 3.23 10 Bolt Rear End
I'm looking for a 10 bolt with either 3.08 or 3.23 gears. It should be mostly complete (gears, diff, cover, axles, backing plates) the more complete the better though. Drum brakes and open diff is fine, Torsen would be a bonus, but I'll also consider a clutch type posi if the price is right. 28 spline (88 or newer) greatly preferred.
Thanks!
Thanks!
10-18-2021, 09:25 AM
#4
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: Holly, MI
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 Camaro
Engine: 4.3L V6
Transmission: T5
Axle/Gears: 2.73
Re: Want to Buy 3.08 or 3.23 10 Bolt Rear End
I just want to bump this thread as I'm still looking for a rear end. I've had some things come up but finally have time to get back to this.
I've decided on a 3.08 ratio, 28 spline still preferred but not required. Any brake setup is fine. Thanks!
I've decided on a 3.08 ratio, 28 spline still preferred but not required. Any brake setup is fine. Thanks!
10-22-2021, 02:35 AM
#5
Junior Member
Re: Want to Buy 3.08 or 3.23 10 Bolt Rear End
If you have a guy in your area that parts lsx cars out... I highly recommend finding a rear end from a 98-02 t56 car as they came with 3.42 gears and you'll have amazing disc brakes via 45mm piston aluminum PBR brand caliper. Just would need to buy the kit for the parking brakes. Best upgrade for under $400 and nailing 2 birds with 1 stone.
Thread
Thread Starter
Forum
Replies
Last Post
1983camaro55199
Transmissions and Drivetrain
3
07-20-2009 07:05 AM