Engine Swap 92 Buick LeSabre 5.7L to 86 Z28 Camaro 5.0L
#1
Junior Member
Thread Starter
Join Date: Oct 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: `86 Z28 Camaro
Engine: 305- 5.0L
Engine Swap 92 Buick LeSabre 5.7L to 86 Z28 Camaro 5.0L
The car with the 350 motor is either a LeSabre or a roadmaster. Will this engine fit well or will modifications need to be made? Also if transmission is switched should it work with the rest of the original chevrolet parts in the camaro?
Also will the engine run differently than if I use a rebuilt chevrolet 5.7L?
Also will the engine run differently than if I use a rebuilt chevrolet 5.7L?
Last edited by RElias0903; 10-13-2007 at 10:39 PM.
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
They are basically the same engine externally.
The transmission will be missing the torque arm mount on the tailshaft housing. 4 bolts, switch them around.
The transmission will be missing the torque arm mount on the tailshaft housing. 4 bolts, switch them around.
#3
Member
iTrader: (5)
Join Date: May 2005
Location: Mooresville, NC
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Buick Regal
Engine: 355
Transmission: TH350
Axle/Gears: 4.11
Re: Engine Swap 92 Buick LeSabre 5.7L to 86 Z28 Camaro 5.0L
Woa, I thought someone was putting a 350 into a LeSabre.....
Yeah the 350 from the Roadmaster would bolt exactly where your 305 was. But I would think that you would need the computer from the roadmaster also, for the 350 throttle body injection, unless you plan on putting a carb on it. I would think that the Roadmaster computer can plug right into where your existing computer is tho.
Yeah the 350 from the Roadmaster would bolt exactly where your 305 was. But I would think that you would need the computer from the roadmaster also, for the 350 throttle body injection, unless you plan on putting a carb on it. I would think that the Roadmaster computer can plug right into where your existing computer is tho.
#4
Supreme Member
Join Date: Jul 1999
Location: Vereinigten Staaten
Posts: 2,767
Likes: 0
Received 2 Likes
on
2 Posts
Car: Take
Engine: Your
Transmission: Pick
Re: Engine Swap 92 Buick LeSabre 5.7L to 86 Z28 Camaro 5.0L
The longblock is pretty much "plug and play", however the center intake manifold bolts are angled differently, which will require you to modifiy those bolt holes in the intake (assuming you are keeping your original intake).
#5
TGO Supporter
Join Date: Oct 2002
Location: Saskatoon, SK, Canada
Posts: 9,067
Likes: 0
Received 1 Like
on
1 Post
Car: '83 Z28, '07 Charger SRT8
Engine: 454ci, 6.1 Hemi
Transmission: TH350, A5
Axle/Gears: 2.73 posi, 3.06 posi
Re: Engine Swap 92 Buick LeSabre 5.7L to 86 Z28 Camaro 5.0L
LT1 or TBI 5.7???
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM