projectRS92

looking to do a 350 swap but not sure what car/truck i should pull it from and what year sould i look in

1gary

1996 to 2000 L31.

vetteoz

iTrader: (13)

The L31 350 was fitted in

1996–2002 Express/ Savana full-size vans
1996 G-Series vans over 8,500 lb GVW w/ 4L80E transmission
1996–1999 C/K full-size trucks
1996–1999 Suburban full-size long-wheelbase SUVs
1996–1999 Tahoe/ Yukon
1999–2000 Cadillac Escalade
2000 Tahoe Limited and 2000 Tahoe Z71 models)

Jim85IROC

iTrader: (2)

Gary and Vetteoz are completely correct, but depending on your overall goals, you may not necessarily need to restrict yourself to just that motor. Are you looking for a motor that you can just swap in, slap an intake & carb on and use? If so, then I agree with their suggestion 100%. However, if you're going to rebuild the motor you get, and especially if you're going to use different and/or aftermarket heads, your options for a starting point open up a lot wider, mainly to ANY 350 that is roller-cam ready.

watajob

iTrader: (29)

Please be aware that not all 880 blocks are fully machined for a mechanical fuel pump, some have no coolant bypass hole at the pump and some don't make nice with several aftermarket timing covers.

RyanJB

Whatever you buy make sure you get it machined and checked out before you go throwing parts at it

projectRS92

Going to buy one and rebuild it and then put in just don't want to meany problems trying to put it in

vetteoz

iTrader: (13)

It is just another SBC , identical to the 305 you have now and fits exactly the same.

rusty vango

buy something with the "LS" series engine,swap everything over.you will be happy

1gary

For got one tinnie winnie detail with a LSx swap.$$$$$$$$$$$$$$$$$$ Yep that's it.