2.8l and 3.1l hybrid
11-21-2021, 03:42 PM
#1
Junior Member
Thread Starter
Join Date: May 2021
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 camaro Sport coupe
Engine: 2.8l multiport FI
Transmission: 4 speed with OD
2.8l and 3.1l hybrid
One of the main bearings and rod bearings are gone in my 2.8l. Am I able to use a 3.1 blotting end and put the 2.8 top end on ?
the 3.1 mpfi is supposedly an 88 and the 2.8 mpfi
is an 87
the 3.1 mpfi is supposedly an 88 and the 2.8 mpfi
is an 87
01-04-2022, 10:02 PM
#2
Supreme Member
iTrader: (5)
Join Date: Sep 2004
Location: Casselberry, FLA
Posts: 2,771
Likes: 0
Received 5 Likes
on
5 Posts
Car: 88 V6 'bird/89TBI bird/85 T/A
Engine: 2.8/TBI/TPI
Transmission: V8 T-5/700R4 x2
Axle/Gears: 3.42 open/2.73 open/ 3.27 9 bolt
Re: 2.8l and 3.1l hybrid
The 3.1 mpfi didn't show up until 1990 in our cars. From 90 to 92 they are speed density, before 90 the 2.8 mpfi is mass air. The intake stuff is different, heads are the same.
Thread
Thread Starter
Forum
Replies
Last Post