Mailman818

pulled out the interior wiring harness from an 86 iroc.
any plugs you may need i can cut do desired length or if you want the whole bit let me know. i have all of them except power mirriors harness. have seperate plug for hatch release w/ button.
i dont have power window switches. they broke
also have seperate what i believe is a ac controlling harness. box has ac marked on it so thats what im assuming it is
plugs for a dollar plus shipping. whole harness for 20 bucks plus shipping
will be pulling connector set to engine bay electronics soon and ill sell that for 10 extra or parting out. lmk aaron

Maverick H1L

iTrader: (8)

The sub-harness with the "AC" box is the cruise control harness... The box is the control module.

Would you be willing to separate the cruise harness and the power door stuff (also a fully independent harness) from the rest (don't need either as I already have them) and sell the rest?

Mailman818

you can take all of it and just use what you need.
you dont need power door stuff like windows, locks, and mirror right? nor cruise box? or are those what you want?

ill let emm go cheaper as i dont really need them and theyre taking up space in my garage. i can give you the interior wiring and the wires to the front of the car for headlights and such for 20 plus shipping hell even 15 plus shipping ill take
if you dont want those power stuff ill take emm out.
also this doesnt have cables for speakers from what i can remember. i think i have them laying around somewhere as the p.o really tore it to pieces.

lmk _aaron

Maverick H1L

iTrader: (8)

I don't need any of the power accessory stuff as that harness is the only one currently installed in the 88 (power locks and windows, don't have power mirrors). Can't use the 3rd gen cruise control with the 3100 setup as the cables are different (and can't get rid of the cruise stuff I have already). Already have a radio/speaker harness that will be installed when I fix the wire routing. I paid for a Camaro headlight/front end harness a couple of days ago but will take a tail light harness if you have one.

Mailman818

do have the tail light harness need the just rear end pieces? or do you want wires all the way from the front? i can take pics of just the rear piece if youd like? _aaron

mantaguy

iTrader: (5)

Hey Mailman,what's the P/N on that cruise control mogul,might be interested!!!

Maverick H1L

iTrader: (8)

I'll take the entire body harness from the bulkhead connector (passenger's compartment side) all the way to the back corner of the car (if the tail harness is a Camaro harness... I already have 3 Bird harnesses I have no use for anymore).

Mantaguy, I have a full working cruise setup I can't use if you're interested (dash harness, module, engine bay harness, modulator, brake switch). You will, however, need to improvise a switch setup (as I replaced my factory non-working switch according to the Tech Article and used 3 independent switches).

Mailman818

@ manta guy.
well the only numbers that i see are next to a barcode sticker thats falling off but it has a 25074709 on top and 37bg in the center then under a barcode. hope this helps