KagA152

iTrader: (5)

Ok, so ive found a couple different setups, and I was just looking for some feedback as to what is best. I searched on here for a while with not much luck, just camaros. I have seen TTA850s setup, this thread https://www.thirdgen.org/forums/powe...tercooler.html, and this thread http://www.ls1tech.com/forums/conver...r-project.html. I havent found any good pictures of a stock 89 setup. I remember when BBS designs was on here, somebody used an intercooler from a diesel truck in place of the condenser. Im hoping theres some people lurking in the shadows who havent posted pics or have done lots of research on the subject. So pics, tips, tricks, sizes, anything to help me over this speed bump.

daverr

iTrader: (1)

I have few old pics of my intercooler on my gta.And yes it fits behind front clip

Guest

The stock 89 setup? As in TTA? That intercooler mounts between the engine and the radiator fan so... its probably not going to work for you if you have a 5.3 (LS_ V8?) in there.

noboostnogo

iTrader: (4)

hey, check out my turbo build thread by clickin on the link in my sig. I mounted my intercooler in front of my radiator.

KagA152

iTrader: (5)

thanks for the pics guys. either you modify or build an air damn to put at the front of the intercooler?

noboost, what size is that intercooler?

noboostnogo

iTrader: (4)

its a 31x12x3

vipershark11

iTrader: (6)

Heres mine its 31x12x3. I had to do a lot of trimming with the front impact bar. I switched it to the correct 91-92 air dam last year with a Taurus fan and it cools fine now. I may add a custom air dam if it decides to run hot this year, but it shouldnt now that I have an appropriate sized exhaust.

Twin_Turbo

iTrader: (25)