Monthly Fat Boys Cruise In - COLUMBIA SC
#1
Supreme Member
Thread Starter
Join Date: Mar 2000
Location: Lexington, SC
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28, 2001 Z/28
Engine: 355 Built a bit / LS1
Transmission: T-5 / A4
Axle/Gears: 4.10 / 2/73's
Monthly Fat Boys Cruise In - COLUMBIA SC
For those of you that know and those that dont... there is a Cruise in that is put on by the Classic Chevrolet Club of SC that is held the second saturday of every month from April until October. This Saturday is the first one of the year. I am planning on bringing the purple car out there. It is from 6pm until... and a good time is had by all. It is located in West columbia, at the intersection of Wattling Road, and Augusta Highway(highway1) in the parking lot of Fat Boys resturant and Big Lots. it is free to show, free to spectate, and no trophys are awarded.. its a nice free time!!! plus fat boys makes killer milkshakes. Hope to see everyone there if the weather permits!!!
-Steve
-Steve
#3
Supreme Member
Thread Starter
Join Date: Mar 2000
Location: Lexington, SC
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28, 2001 Z/28
Engine: 355 Built a bit / LS1
Transmission: T-5 / A4
Axle/Gears: 4.10 / 2/73's
Originally posted by Ragtop89
When is the next one?
EDIT: Pulled my head out of my a$$ and re-read your post.
This Saturday, April 12th at 6pm.
Cool!
When is the next one?
EDIT: Pulled my head out of my a$$ and re-read your post.
This Saturday, April 12th at 6pm.
Cool!
-steve
#5
Supreme Member
Thread Starter
Join Date: Mar 2000
Location: Lexington, SC
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28, 2001 Z/28
Engine: 355 Built a bit / LS1
Transmission: T-5 / A4
Axle/Gears: 4.10 / 2/73's
Originally posted by Ragtop89
Looks like it.
I'll rolling in the vert if the weather is nice.
Looks like it.
I'll rolling in the vert if the weather is nice.
-steve
Sides, fat boys makes KILLER Milk shakes!!
#7
Supreme Member
Thread Starter
Join Date: Mar 2000
Location: Lexington, SC
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28, 2001 Z/28
Engine: 355 Built a bit / LS1
Transmission: T-5 / A4
Axle/Gears: 4.10 / 2/73's
Originally posted by 91tirespin
I'll be there. I'll prolly bring some of my buddies up there too. Hope to see you guys.
I'll be there. I'll prolly bring some of my buddies up there too. Hope to see you guys.
-steve
Trending Topics
#8
Originally posted by Purple 92 SS
killer, forgive me when i meet you cause im REAL bad with names..
killer, forgive me when i meet you cause im REAL bad with names..
I'll walk up and say," Hey Steve! The car is still looking good!"
And you'll say, "Thanks Steve! I've put a lot of time ans effort into her!"
I don't know if you remember but we did meet in the fall of last year!
#10
Junior Member
Join Date: Feb 2003
Location: Lexington, South Carolina
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro rs
Engine: 355
Transmission: 700r4
I had a great time too. Nice to meetcha steve. Ragtop I saw you leave. Car looks good and sounds mean with that cam. Also what are the stats on your cam?
#11
Supreme Member
Thread Starter
Join Date: Mar 2000
Location: Lexington, SC
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28, 2001 Z/28
Engine: 355 Built a bit / LS1
Transmission: T-5 / A4
Axle/Gears: 4.10 / 2/73's
yea i had a great time too.. glad you guys made it out and over so we could chit chat. I remember you vaguely steve. Remember the face, just like i said though Im horrible with names.
There were a good turn out of 3rd gens.. it was nice seeing everyone... and i love your vert.. i wish i had one sooo bad.. you just have no idea!!! the next 3rd gen will have to be one unless i get a killer deal!!
anyways.. gotta run.. cruize in is happening again 2nd saturday next month!
-steve
There were a good turn out of 3rd gens.. it was nice seeing everyone... and i love your vert.. i wish i had one sooo bad.. you just have no idea!!! the next 3rd gen will have to be one unless i get a killer deal!!
anyways.. gotta run.. cruize in is happening again 2nd saturday next month!
-steve
#12
Originally posted by 91tirespin
I had a great time too. Nice to meetcha steve. Ragtop I saw you leave. Car looks good and sounds mean with that cam. Also what are the stats on your cam?
I had a great time too. Nice to meetcha steve. Ragtop I saw you leave. Car looks good and sounds mean with that cam. Also what are the stats on your cam?
Specifications:
* Advertised duration: 282 intake/290 exhaust
* Duration at .050 in.: 232 intake/240 exhaust
* Gross valve lift: .565 in. intake/.574 in. exhaust
* Lobe separation: 112 degrees
* RPM range: 2,600-6,500
* Street/strip, needs EEC IV upgrade, heads, intake and gears
This Comp Cams Xtreme Energy camshaft is built to take advantage of the latest cam technology to provide maximum performance. By using an aggressive lobe profile, this cam provides better throttle response and more top end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
#13
Junior Member
Join Date: Feb 2003
Location: Lexington, South Carolina
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro rs
Engine: 355
Transmission: 700r4
Nice. I'm plannin on putting something like that in my 350 once I finish rebuilding it. Also is your car pretty streetable with that cam?
#14
Supreme Member
Thread Starter
Join Date: Mar 2000
Location: Lexington, SC
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28, 2001 Z/28
Engine: 355 Built a bit / LS1
Transmission: T-5 / A4
Axle/Gears: 4.10 / 2/73's
Originally posted by Ragtop89
It's just a CompCams XE282Hr cam.
Specifications:
* Advertised duration: 282 intake/290 exhaust
* Duration at .050 in.: 232 intake/240 exhaust
* Gross valve lift: .565 in. intake/.574 in. exhaust
* Lobe separation: 112 degrees
* RPM range: 2,600-6,500
* Street/strip, needs EEC IV upgrade, heads, intake and gears
This Comp Cams Xtreme Energy camshaft is built to take advantage of the latest cam technology to provide maximum performance. By using an aggressive lobe profile, this cam provides better throttle response and more top end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
It's just a CompCams XE282Hr cam.
Specifications:
* Advertised duration: 282 intake/290 exhaust
* Duration at .050 in.: 232 intake/240 exhaust
* Gross valve lift: .565 in. intake/.574 in. exhaust
* Lobe separation: 112 degrees
* RPM range: 2,600-6,500
* Street/strip, needs EEC IV upgrade, heads, intake and gears
This Comp Cams Xtreme Energy camshaft is built to take advantage of the latest cam technology to provide maximum performance. By using an aggressive lobe profile, this cam provides better throttle response and more top end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
The cam for your street/strip car.
Chevrolet: 262-400, 292/292 degrees duration, hydraulic, Magnum camshaft
The Magnum camshaft is designed specifically for the street enthusiast looking for more power with that pro street sound. The design of the Magnum cam will not only give your engine an aggressive sound, but it will increase your vehicles power output.
Specifications:
* Advertised duration: 292 intake/292 exhaust
* Duration at .050 in. cam lift: 244 intake/244 exhaust
* Gross valve lift: .501 in. intake/.501 in. exhaust
* Lobe separation: 110 degrees
* RPM range: 2,500 to 6,500
* Stall in heavy car, with 10:1 compression
#15
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Damn...missed it. When's the next one? Columbia isn't too far...lot closer than Greenville
Keep me posted and I'll keep my eye out.
Ed
Keep me posted and I'll keep my eye out.
Ed
#16
Supreme Member
Thread Starter
Join Date: Mar 2000
Location: Lexington, SC
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28, 2001 Z/28
Engine: 355 Built a bit / LS1
Transmission: T-5 / A4
Axle/Gears: 4.10 / 2/73's
Originally posted by ebmiller88
Damn...missed it. When's the next one? Columbia isn't too far...lot closer than Greenville
Keep me posted and I'll keep my eye out.
Ed
Damn...missed it. When's the next one? Columbia isn't too far...lot closer than Greenville
Keep me posted and I'll keep my eye out.
Ed
-steve
#17
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
OK...I'm a dumbass. Guess I missed that. We'll see if I can make it.
Ed
Ed
#18
Supreme Member
Thread Starter
Join Date: Mar 2000
Location: Lexington, SC
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28, 2001 Z/28
Engine: 355 Built a bit / LS1
Transmission: T-5 / A4
Axle/Gears: 4.10 / 2/73's
Originally posted by ebmiller88
OK...I'm a dumbass. Guess I missed that. We'll see if I can make it.
Ed
OK...I'm a dumbass. Guess I missed that. We'll see if I can make it.
Ed
-stee
#19
Re: Monthly Fat Boys Cruise In - COLUMBIA SC
I will be attending the September Cruise in at Fat Boys/Big Lots Parking lot and will be bringing over 90 bagged and boarded car advertisements from 1930s,1950s and 1960s along with notebooks with ads about hunting and fishing from the 1930s-1980s also a display of old fishing tackle that I collect
#20
Member
Join Date: Oct 2005
Location: columbia s.c.
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Car: camaro84.87iroc,91vert
Engine: Lt1, 383tpi,350tbi
Transmission: t56,T5,T5
Axle/Gears: 4thgenunknown,373,323?
Re: Monthly Fat Boys Cruise In - COLUMBIA SC
Ok but don't be late.
#21
Re: Monthly Fat Boys Cruise In - COLUMBIA SC
I plan to be there at 3 in the afternoon to set up my Pagoda shade and table with my adverizements--I hope that will not be too late-I plan to set up at the fringe of the area so as not to take space from cars being shown.
Thread
Thread Starter
Forum
Replies
Last Post
wigmobile
Electronics
3
09-17-2015 03:38 PM