305 camshaft help???
#1
Member
Thread Starter
Join Date: Jul 2003
Location: sw michigan
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90 gta
Engine: 5.slow turbo
Transmission: tremec tko
305 camshaft help???
thanks for reading, here's the plan, i have a 90 gta with the 305, decided to hold off on the 350 till next year and get all the acessories this year do the motor next year, but i need some more from the 305.
here's what i'm getting/have:
a stock 305, edelbrock headers, borla exhaust, accel gen7(so i'll be compatible with just about anything i hope), stealth ram intake is coming cause i have an intake manifold vac/oil/coolant leaks now so i might as well put that on now.
i'm worried the stealthram wil be too much for the stock cam/config so figured i'd bump up the bumpstick while i'm in there.
i was gonna go with the hot cam with the 350 but i havent' done any research on the 305, this was decided late in the game to stay with the 305, any help would be apreciated.
thanks
jim
ps, you can replace the cam in the car with the radiator out right???
here's what i'm getting/have:
a stock 305, edelbrock headers, borla exhaust, accel gen7(so i'll be compatible with just about anything i hope), stealth ram intake is coming cause i have an intake manifold vac/oil/coolant leaks now so i might as well put that on now.
i'm worried the stealthram wil be too much for the stock cam/config so figured i'd bump up the bumpstick while i'm in there.
i was gonna go with the hot cam with the 350 but i havent' done any research on the 305, this was decided late in the game to stay with the 305, any help would be apreciated.
thanks
jim
ps, you can replace the cam in the car with the radiator out right???
Last edited by BANDITSBC; 03-28-2004 at 06:16 PM.
#2
Supporter/Moderator
iTrader: (7)
Join Date: Feb 2001
Location: Cincinnati, OH
Posts: 13,253
Likes: 0
Received 394 Likes
on
300 Posts
Car: '90 RS
Engine: 377 LSX
Transmission: Magnum T56
Re: 305 camshaft help???
Originally posted by BANDITSBC
thanks for reading, here's the plan, i have a 90 gta with the 305, decided to hold off on the 350 till next year and get all the acessories this year do the motor next year, but i need some more from the 305.
here's what i'm getting/have:
a stock 305, edelbrock headers, borla exhaust, accel gen7(so i'll be compatible with just about anything i hope), stealth ram intake is coming cause i have an intake manifold vac/oil/coolant leaks now so i might as well put that on now.
i'm worried the stealthram wil be too much for the stock cam/config so figured i'd bump up the bumpstick while i'm in there.
i was gonna go with the hot cam with the 350 but i havent' done any research on the 305, this was decided late in the game to stay with the 305, any help would be apreciated.
thanks
jim
ps, you can replace the cam in the car with the radiator out right???
thanks for reading, here's the plan, i have a 90 gta with the 305, decided to hold off on the 350 till next year and get all the acessories this year do the motor next year, but i need some more from the 305.
here's what i'm getting/have:
a stock 305, edelbrock headers, borla exhaust, accel gen7(so i'll be compatible with just about anything i hope), stealth ram intake is coming cause i have an intake manifold vac/oil/coolant leaks now so i might as well put that on now.
i'm worried the stealthram wil be too much for the stock cam/config so figured i'd bump up the bumpstick while i'm in there.
i was gonna go with the hot cam with the 350 but i havent' done any research on the 305, this was decided late in the game to stay with the 305, any help would be apreciated.
thanks
jim
ps, you can replace the cam in the car with the radiator out right???
#3
Senior Member
Join Date: Aug 2001
Location: fredericksburg, va
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 ta ws6 KITT
Engine: Lb9
Transmission: th350
keep us posted on the HSR 305. AFAIK, no one has attempted that yet. Are you going to rebuild the bottom end? I know the HSR likes to rev....
Thread
Thread Starter
Forum
Replies
Last Post