need some Bolt sizes (cold start inj, TPS, throttle linkage)
#1
Senior Member
Thread Starter
Join Date: Jan 2002
Location: orlando
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
Car: 98 Camaro SS
Engine: LS1
Transmission: M6
need some Bolt sizes (cold start inj, TPS, throttle linkage)
Im puttiny my GTA back together and I lost a few bolts... I need the sizes for:
Cold start injector bolt
TPS bolt (holds tps to TB)
Throttle bracket (holds throttle/cruise cables to plenum)
Thanks.
Cold start injector bolt
TPS bolt (holds tps to TB)
Throttle bracket (holds throttle/cruise cables to plenum)
Thanks.
#2
I would just check the dealer. The TPS bolts cant be had from anywhere I know of, except maybe a scrapyard. Not sure about the others though. Use a dab of antisieze on the TPS bolts. They are known for getting stripped.
#3
Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Irmo, SC
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Pontiac GTA
Engine: 305TPI
Transmission: 700R4
Axle/Gears: 10-bolt, 2.73
The throttle bracket bolts are M6X1X13.
The TPS sensor bolts are available as part of a TB screw kit from GM as part #17112369. It's about $15. Other than that I have know idea on their size.
Cold start injector bolt? I don't have the information on that one.
HTH
The TPS sensor bolts are available as part of a TB screw kit from GM as part #17112369. It's about $15. Other than that I have know idea on their size.
Cold start injector bolt? I don't have the information on that one.
HTH
#4
Originally posted by Jade Grey
The throttle bracket bolts are M6X1X13.
The TPS sensor bolts are available as part of a TB screw kit from GM as part #17112369. It's about $15. Other than that I have know idea on their size.
Cold start injector bolt? I don't have the information on that one.
HTH
The throttle bracket bolts are M6X1X13.
The TPS sensor bolts are available as part of a TB screw kit from GM as part #17112369. It's about $15. Other than that I have know idea on their size.
Cold start injector bolt? I don't have the information on that one.
HTH
Yea, that kit is what I bought a while back. It includes the TPS bolts, IAC housing bolts, and IIRC, the top "tuned port" plate bolts.
Thread
Thread Starter
Forum
Replies
Last Post