Did I get the right gasket?
11-12-2001, 03:02 PM
#1
Member
Thread Starter
Did I get the right gasket?
When I placed my vortec head/tpi base order with soggin dickey I asked for head gaskets and didn't think twice. I don't know anything about these so please help me out. Here is what I got GM performance parts #10185054
http://www.sdpc2000.com/cart.asp?act...id=576&pid=733
This is for a stock L98 with vortec heads. Should I send these back and ask for some thinner fel-pros? Thanks!!
------------------
-='89 Iroc-Z - 350 TPI =-
http://www.sdpc2000.com/cart.asp?act...id=576&pid=733
This is for a stock L98 with vortec heads. Should I send these back and ask for some thinner fel-pros? Thanks!!
------------------
-='89 Iroc-Z - 350 TPI =-
11-12-2001, 10:49 PM
#3
Member
Join Date: Aug 2001
Location: Pelzer, SC, USA
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
If your car has a 350, you'll probably like the extra chamber volume to lower the comression. I got my Vortecs from SDPC, and I've been real happy. One thing is the rocker arms: make sure you have self-aligning, or use pushrod guideplates. Good luck, and let us know how it turns out.
------------------
Jeff
'85 Berlinetta, Special Beater Edition
Mods include a 4bolt 350 with 280*, .460 lift cam, Vortec heads, Comp Cams roller tip rockers, Edelbrock TES headers, no other exhaust
. Also, rusted parts on all 4 corners, and crumpled fenders, thanks to the previous owner.
------------------
Jeff
'85 Berlinetta, Special Beater Edition
Mods include a 4bolt 350 with 280*, .460 lift cam, Vortec heads, Comp Cams roller tip rockers, Edelbrock TES headers, no other exhaust
. Also, rusted parts on all 4 corners, and crumpled fenders, thanks to the previous owner. 
Thread
Thread Starter
Forum
Replies
Last Post
