Help me finish installing my steering column.
#1
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Indiana
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: Auto
Help me finish installing my steering column.
I just finished installing my new steering column, for the most part. There's piece I'm having trouble with. It goes on the back of this plug mount. The piece is plastic with two tiny screws at the end and a metal rod going into the bottom of the column. Any tips?
#2
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Indiana
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: Auto
Re: Help me finish installing my steering column.
Bump. Searched and couldn't find anything on this
#3
Supreme Member
iTrader: (25)
Re: Help me finish installing my steering column.
that's your ignition switch, why did you take it off? Now you have to drop the column again to install it or are you talking about the dimmer switch that screws onto the ignition switch?>
Last edited by Twin_Turbo; 03-27-2013 at 11:21 AM.
#4
Member
Join Date: Jan 2013
Location: Oklahoma
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z28
Engine: 388 SBC
Transmission: TH350 Lockup
Axle/Gears: 3.42
Re: Help me finish installing my steering column.
Looks like ignition switch to me............. hopefully not though..
#5
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Indiana
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: Auto
Re: Help me finish installing my steering column.
That's the one off my old column. The car starts runs and drives fine, I just can't figure out what mounts on the back of it
YES! So that's high/low beams? It's a PITA to get back on, so I might just leave it until I need to work under the dash again...
YES! So that's high/low beams? It's a PITA to get back on, so I might just leave it until I need to work under the dash again...
Last edited by MetabolicHigh; 03-27-2013 at 12:30 PM.
#6
Member
Join Date: Jan 2013
Location: Oklahoma
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z28
Engine: 388 SBC
Transmission: TH350 Lockup
Axle/Gears: 3.42
Re: Help me finish installing my steering column.
I'd save it for a rain filled day, and just do it then, You should be fine, unless you feel like taking on another project. Shouldn't take too long...
#7
Supreme Member
Join Date: Jun 2005
Location: Sydney, Australia
Posts: 1,380
Likes: 0
Received 5 Likes
on
5 Posts
Car: '86 TA
Engine: '74 350
Transmission: 700r4
Axle/Gears: 2.77
Re: Help me finish installing my steering column.
Here's the dimmer switch, and how it mounts to the ign switch. Sorry pics are a bit small:
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Indiana
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: Auto
Re: Help me finish installing my steering column.
Thanks for the pictures! Those tiny screws are a mother to get in
#9
Supreme Member
Join Date: Jun 2005
Location: Sydney, Australia
Posts: 1,380
Likes: 0
Received 5 Likes
on
5 Posts
Car: '86 TA
Engine: '74 350
Transmission: 700r4
Axle/Gears: 2.77
Re: Help me finish installing my steering column.
And you've got to simultaneousy align both switches with their respectve rods as you do the screws up, fun fun
Thread
Thread Starter
Forum
Replies
Last Post
Black89TA
Exterior Parts for Sale
9
07-23-2016 10:42 AM
evilstuie
Exhaust
24
02-28-2016 03:33 PM