Harmonic Balancer Question
02-22-2002, 08:30 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2000
Location: Casa Grande, Arizona,USA.
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Harmonic Balancer Question
I am in the process of putting a new or different 350 in my car. It is a 4-bolt 350 with a one piece rear seal. I found out today that I had to have a different flex-plate, an externally balanced one, I had a two piece seal motor before. The big question is will the balancer that was on my old motor work?? I know that there are internally balanced balancers and external ones, the one that I have is a stock 6 3/4 balancer and is just fine so I hope that I don't have to get another one!!!!! If there is someone out there that knows what the deal is please let me know, I don't want to mess up a new motor!!!!! Thanks NORT
02-22-2002, 10:22 PM
#3
Supreme Member
Join Date: Jul 2001
Location: Pueblo Co
Posts: 3,974
Likes: 0
Received 0 Likes
on
0 Posts
Car: No more birdy
The harmonic damper you describe is from a 305. 305's & 350's are internally ballanced. The damper will work the flexplate / flywheel will not. I would reccomend getting a 350 8in damper so you can use the 3 O-clock timing position. The hardest part with using a 6in is finding where the timing tab should be located.
Thread
Thread Starter
Forum
Replies
Last Post
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM
