Theoretical and Street RacingUse this board to ask questions about street racing, discuss your street races, and "who would win?" questions. Keep it safe.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i have my 86 z28 with a l98, full bolt ons, edlebrock high flow intake manifold, msd igntion, 3.73's, 52mm bbk tb, and a 100 shot. his is an 02 camaro z28 with high flow cats, an ls6 intake manifold, and 3.73's with street tires. i think it would be a close race from a dig but do i have a chance or what?
He's prolly putting down a healthy 315-320rwhp though. Ls1's have a hell of a power band and i bet he shifts at higher rpms then you do. His manual should get him off the line pretty quick but with your mods you should be putting down a good amount of torque. Its too bad you don't have a high stall converter.
__________________
- '84 Z - 350ci - Mild Edelbrock Camshaft - Weiand Xcelerator Intake Manifold - Hedman LT's - 600cfm 4 barrel - True Duals - 700R4 - 3k stall/shift kit -275 Radial T/A's -
-1999 Trans Am M6 - Full bolt on's + more -
Without the spray you will get murdered. Not off the line, that will appear to be close, but he will walk you hard past that. A stock LS1 makes around 380 at the crank. Combine that with the T56 and 3.73's and you have a quick car. However, the 100 spray will make it competitive with you likely the victor.
Im willing to bet he has close to 370 rwhp. Full bolt on minus ls6 intake makes around 325rwhp (corrected) and that intake lets them breath really good. from a dig u should get him but will still be close. but any roll above 45 u are going to have to drive perfect and hope he misses shifts/shifts slow.
Theres no way he has 370 to the crank ALL ls1's have 345 STOCK and the 01-02's had the ls6 intake stock with his set up hes making 300-320 to the wheels give or take. It should be a close race if he can drive but, I think u might edge him out with that spray....
__________________ 2002 camaro z28 a4 air lid, K&N filter, MSD plug wires, NGK tr-55 plugs, free mods, SS hood, DYNOMAX exhaust, Diablo tune, tranny cooler13.0 @ 108 on bald 245's......
i have my 86 z28 with a l98, full bolt ons, edlebrock high flow intake manifold, msd igntion, 3.73's, 52mm bbk tb, and a 100 shot. his is an 02 camaro z28 with high flow cats, an ls6 intake manifold, and 3.73's with street tires. i think it would be a close race from a dig but do i have a chance or what?
First off the 2002 models came stock with the LS6 intake. His car is making around 350-360 at the crank. If he has a cat back add ten to that. I would NOT race him from a roll if your running TPI. Your best bet is from a stop. Use the NOS or dont even bother showing up.
Theres no way he has 370 to the crank ALL ls1's have 345 STOCK and the 01-02's had the ls6 intake stock with his set up hes making 300-320 to the wheels give or take. It should be a close race if he can drive but, I think u might edge him out with that spray....
Most stock LS1's dyno too high for 345 to be correct. They are under rated.
slp sux,
get a old school mti, the original design, or the ls1 motorsports which was a copy (hard to find) best sealing, proven to make more hp over others
-
