dacuma

Alright fellows heres the deal, I'm trying to pick out a cam, I perfer to go with a Crane Compu Cam, I don't want to go to big, just to add the most power I can with that. Alright I'm trying to decide, does any one have one of these Compu Cam? If so whats your 1/4 mile time and whats your set up, Or if anything what would be my best set up? I got a 89 L98, current mods are, Edelbrock cat back, ported pleuim, SLP runners, cut air boxes, fuel pressure reg, accel wires, plugs, dist. Transgo Shift kit. So guys what would be the best Compu Cam to go with, or any other? And please post your resluts, Thanks

johnsjj2

Take this with a grain of salt, but if that were my engine, I would either pick the 2030, which specs at 264/274, .423/.446-hydraulic, or the 2032HR, 270/276, .452/.465-hyd. roller. Unfortunetly I have never ran these before. Its your motor, and these are my opinion. Pick what you want.



------------------
Joshua Johnston
1991 Z-28
Flowmaster
K&N
305 / 5spd. (Temporary)

PETE

iTrader: (1)

i would go with a mild grind such as the slp small cam it has 206/212 then just focus on tuning the suspension and get a vigillante converter if you are gonna go to the track at all you could p/u a lot of time just dialing the suspension in