TPI.Hard start
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Trans-Am/2005 Pontiac Grand Pr
Engine: TPI 305
TPI.Hard start
I have a 1986 T/A with the TPI and when I start it I have to hold the peddle to the floor and after it starts it won't idle but it will rev and when I put it in gear it stalls any idea's?
#2
Member
iTrader: (2)
Join Date: May 2004
Location: Eden, NY
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Trans am
Engine: TBI 350 HO Vortec heads
Transmission: 700R4
Re: TPI.Hard start
Mine does the same. I believe its a weak fuel pump. If my tank gets to under a ⅓ it has fuel delivery issues.
#3
Supreme Member
iTrader: (17)
Re: TPI.Hard start
Any trouble codes? Is the SES light on? hard start can be a few things but usually it's the ignition system. May need new wires, plugs, and new dizzy guts. Holding the peddle to the floor to get it to start means that when you give some pedal, your opening the throttle plates thus allowing more air into the engine, BUT, also you are opening up the TPS. So my first thing that I would so is tune up the TPI system. Here are two good links for you. Tune the TPI system, then get back at me if the issue is still there at hand. Good Luck bro.
http://74.125.155.132/search?q=cache...&ct=clnk&gl=us
http://mpikas.blogspot.com/2008/08/t...june-2000.html
http://74.125.155.132/search?q=cache...&ct=clnk&gl=us
http://mpikas.blogspot.com/2008/08/t...june-2000.html
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM