TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Swapping alternator tips*

Thread Tools
 
Search this Thread
 
Old 06-05-2010, 08:17 AM
  #1  
Senior Member
Thread Starter
 
transam85dudeman's Avatar
 
Join Date: Mar 2006
Location: CALI
Posts: 926
Likes: 0
Received 1 Like on 1 Post
Car: 85' Trans Am !best car ever!
Engine: 305tpi 215hp LB9 two bolt,
Transmission: th-700r4
Axle/Gears: stock (3.27)
Swapping alternator tips*

On a Pontiac 1985 Firebird Trans AM (1 serpentine and 3 v-belts LB9 305 vin F), the alternators need to be slightly modded to be able to bolt up. I removed the outer four small bolt on the new GM alternator casting halves, removed the back cast, reinstalled the internal brushes/springs securely with a paper clip in the rear casting slot, and reattached the casting a 1/4 turn to match the bolt configuration of the previous alternator. Also to add, have to reuse the old serp. pulley (5 dollar pulley from tractor equip. store) removed with an impact.

Wanted to add, most alternators are rebuildable. I rebuilt my previous alternator once, 10 dollars on small part, total overall alternator life was 2 1/2 years in between failures. Originally in 2005 i was persuaded away from the 1985 108amp alternator because didnt bolt up like the original one, very frustrated I settled for a 1983-84 alternator (83amps) because it bolted right up. But instead of rebuilding the 83amp alt. after a recent* failure, instead i bought a 108 amp alt. and split the two halves and rotated 1/4 turn. Lifetime warranty on the alt. should be good.

Last edited by transam85dudeman; 06-05-2010 at 08:21 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cornholio7979
TPI
4
09-20-2018 02:31 AM
Skwisgaar
Mid-West Region
14
09-01-2015 08:41 AM
Cleotiz
Electronics
3
08-23-2015 12:07 PM
Dialed_In
Firebirds for Sale
2
08-20-2015 01:45 PM



Quick Reply: Swapping alternator tips*



All times are GMT -5. The time now is 11:21 PM.