transgo 2/3 kit ??s
#1
Senior Member
Thread Starter
Join Date: May 2001
Location: springfield,IL
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Car: T/A / Grand Am
Engine: 383 SBC
Transmission: glide
Axle/Gears: 9" ford 5.67
transgo 2/3 kit ??s
Has anybody tried using solder to plug the plate, instead of those little plugs they send with it? I installed a shift technoglys kit in it when we rebuilt it, has never worked right. So it's comming out. Went to the track last sat night, tranny wouldn't shift into 3rd at wot. 6500 is a little out of the power band for me. I tried soldering up an old plate tonight, seems like it worked ok. Just seeing if someone else has tried it. Thanks!
#2
Supreme Member
Join Date: Aug 1999
Location: Lowell, MA
Posts: 1,437
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro RS
Engine: sbc 400
Transmission: th350
i dunno if that would be the best idea. you'd want a perfect solder job and i dont know if it would handle right in the temps/fluids.
#3
Supreme Member
Join Date: Jul 1999
Location: Calimesa, California, U.S.
Posts: 3,458
Likes: 0
Received 39 Likes
on
27 Posts
I have never had a problem with the aluminum plugs if they were installed right. Never thought of using solder to block the holes, still the holes would have to be radiused to hold the solder.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
1
01-15-2016 06:26 AM
dimented24x7
Transmissions and Drivetrain
7
09-17-2015 06:58 AM