91greenbird

iTrader: (4)

how hard is it to find a posi/disc 9 bolt rear with 3.45 gears?

DJP87Z28

Not to many of them made and they are very hard to find. A lot of 10-bolt open 3:42 ot there.

Cruz'N Bruz'R

I've got one in the Iroc. I'll shortly be swapping to 4.10's. But they were hard to find.

primo

I have the same rear, please let me know if you get the 4.10, this is will be my next mod, I haven't been able to find one.

Tremo

Where can I find rebuild parts for my 9-bolt? My posi is no longer posi.

mnorton

The 3.45 is probably the most rare of any ever produced. I think only from 1987 to 1989..... You can get new 3.45 Ring & Pinion gears shipped to you from Austrailia that will fit a 9 Bolt rear. I just brought a new gear set for mine.

l98+t5

what ever happened to 9bolt.com? i remeber that being a sight. well now that its time for a rear end rebild for me i would like to know of any parts suppliers for this rear anyone know? thanks

mnorton

9Bolt.com seems to have gone away...

I just bought a new 3.45 Ring & Pinion set from Motospecs.
john.weir@motospecs.com

Shipped from Aus to Calif. Cost was Aus $326 + Aus $165 shipping FedEx. That's $364 total US$.

Ring & Pinion P/N 0578-138036
Pinion Nut P/N 0576-149047

I bought a master installation kit from West Coast Differentials in Rancho Cordova, CA. Comes with Pinion & Diff. Bearings/Spacers/Shims/Crush & some Ring Gear Bolts. West Coast Differentials: Ring & Pinion Gears, Posi's, Lockers & Axle Parts
Ph.# 800-510-0950

P/N IK GM7.75 $135 + Tax & Shipping

Here's another vendor for parts: www.jawsgear.net

You'll also probably want to get Axle Bearings & Seals and a Cover Gasket from Autozone or such.

You also need to get Limited Slip Axle Additive from GM
P/N 1052358

Cruz'N Bruz'R

US gear makes some 3.73's and stuf for the 9-bolt also, you just have to google search.

bubbareno

I just pick one up today. 3:27s out of an 89gta. Got it from camaro heaven in tilton N.H.

Eightyninef

I sell the shims to tighten up the posi cones.
Larry

l98+t5

i think i need to learn more about this differential style. it is a cone type. i dont know much about the cone types. also i know i can get gear set for this rear end but the problem is finding the lsd when it wears out. were can i find one of them. or do you just add shims to tighten it up.

twobirds

9bolt.com is still around,it just call this:


http://www.diffsolutions.com/

Have fun.
Conrad

fireturd350

iTrader: (8)

Older thread, but I found it cause I looking for some 4.11's. I emailed John over at Motospecs asking about anything above a 3.73. 3.73 or 3.70 seem pretty common to find, but much numerically higher is different. I thought I would share the information.