Rearend Swap
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Location: NW Ohio
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Heritage Edition Z28
Engine: 305 TPI
Transmission: Stock
Axle/Gears: Stock
Rearend Swap
I'm doing an LS1 sway and will have a complete rearend from a 98 transam, will a 4gen rearend bolt into an 89 thirdgen if not, what needs tobe done?
#3
Moderator
iTrader: (5)
Re: Rearend Swap
Welcome to TGO. A search on site will often provide the info you're seeking. The following FAQ should provide the info you need:
https://www.thirdgen.org/forums/tran...-10-bolts.html
JamesC
https://www.thirdgen.org/forums/tran...-10-bolts.html
JamesC
#4
Re: Rearend Swap
I see that you are new here. Welcome. Here is some information that might help you. https://www.thirdgen.org/forums/tran...-10-bolts.html
The 4th gen rear end will bolt in, but it is a little wider.
The 4th gen rear end will bolt in, but it is a little wider.
#5
Member
Join Date: May 2008
Location: MN
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28
Engine: 350 TPI
Transmission: T56
Axle/Gears: 3.42 posi
Re: Rearend Swap
yes it can be done, here is a pic of the lt1 style i have in my car with the stock wheels, just can't have the car full of people on bumpy roads....
Thread
Thread Starter
Forum
Replies
Last Post