Which gearbox do I have?
09-21-2011, 07:24 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Which gearbox do I have?
Been having some problems with my camaro's automatic gearbox as of late. It doesn't switch out of 1st until 3500Rpm and the same for second and third.
Then when it changes into 4th theres an almighty thud in the car before it does so.
I'm going to get a company to overhaul it and they need to know which Gearbox is in it.
1987 Camaro I-ROCZ Vin number. *G*FP2*FXHN34*7* (Q-9821)
5.0 TPI V8
Everything else is standard.
Then when it changes into 4th theres an almighty thud in the car before it does so.
I'm going to get a company to overhaul it and they need to know which Gearbox is in it.
1987 Camaro I-ROCZ Vin number. *G*FP2*FXHN34*7* (Q-9821)
5.0 TPI V8
Everything else is standard.
09-21-2011, 09:19 PM
#4
Supreme Member
Join Date: Dec 2000
Location: stallings,n.c.
Posts: 1,271
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 camaro rs convertable
Engine: 305 tbi
Transmission: 700r4
Axle/Gears: 7.5"3.42 gears forth gen 2000 camar
Re: Which gearbox do I have?
Have you tried adjusting the TV cable? www.thirdgen.org/detent
09-28-2011, 06:42 PM
#5
Re: Which gearbox do I have?
Been having some problems with my camaro's automatic gearbox as of late. It doesn't switch out of 1st until 3500Rpm and the same for second and third.
Then when it changes into 4th theres an almighty thud in the car before it does so.
I'm going to get a company to overhaul it and they need to know which Gearbox is in it.
1987 Camaro I-ROCZ Vin number. *G*FP2*FXHN34*7* (Q-9821)
5.0 TPI V8
Everything else is standard.
Then when it changes into 4th theres an almighty thud in the car before it does so.
I'm going to get a company to overhaul it and they need to know which Gearbox is in it.
1987 Camaro I-ROCZ Vin number. *G*FP2*FXHN34*7* (Q-9821)
5.0 TPI V8
Everything else is standard.
and try the TV cable thingy posted above first, these guys are right, that may fix it at no cost, unless the valve in the valve body is hanging, which isn't unusual for that cast iron valve body. Then the valve body needs to come off and clean and polish the TV valve itself. Find a different trans shop to do it.
09-28-2011, 06:51 PM
#6
Supreme Member
Join Date: Dec 2000
Location: stallings,n.c.
Posts: 1,271
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 camaro rs convertable
Engine: 305 tbi
Transmission: 700r4
Axle/Gears: 7.5"3.42 gears forth gen 2000 camar
Re: Which gearbox do I have?
i had a problem with my 84 camaro where it wouldn't shift.the problem was a plastic gear on the governer that had lost its teeth.new gear fixed it.
Thread
Thread Starter
Forum
Replies
Last Post
Hellbillydeluxe
Tech / General Engine
10
09-22-2015 09:58 PM
CAMAROsc350
Suspension and Chassis
4
07-19-2003 02:31 PM
