Truck 700r4 for my 88 Camaro
#1
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Wisconsin
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 and 02 Camaro's
Engine: L96 (LS) and LS-1
Transmission: auto, 6 speed
Axle/Gears: 3.42 gears for both
Truck 700r4 for my 88 Camaro
Ive searched the site and know you can put a truck 700r4 into a 3rd gen. You just have to swap the tailshaft housing that specific for a Camaro. Adding a shift kit will help get a better performing shift as well.
In one of those posts about the topic a member stated that in order to take the tailshaft off yould need to disassemble the whole transmission. Is this true? I can install a shift kit but if i have to disassemble the trans to put a camaro tailshaft on it, it wouldnt be worth the hassle.
I ask because I can get a truck 700r for about 150 bucks, where at a local salvage yard a good used one specificly out of a Camaro will cost about 250 +core.
Thanks for the input.
In one of those posts about the topic a member stated that in order to take the tailshaft off yould need to disassemble the whole transmission. Is this true? I can install a shift kit but if i have to disassemble the trans to put a camaro tailshaft on it, it wouldnt be worth the hassle.
I ask because I can get a truck 700r for about 150 bucks, where at a local salvage yard a good used one specificly out of a Camaro will cost about 250 +core.
Thanks for the input.
#2
Member
Join Date: Aug 2006
Location: Mt.Holly, NC USA
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro, 1986 S10, 2000 Harley
Engine: LS6
Transmission: T56
Axle/Gears: 3.75 9" ford trac loc
Re: Truck 700r4 for my 88 Camaro
If it's a 2wheel drive truck trans, your good to go. A trans from a 4 wheel drive has a shorter output shaft and won't work. Just remove the 4 bolts holding the tailhousing and it will come right off. Later model trucks have a metal reluctor wheel where your camaro trans has a plastic speedo gear. Remove the metal wheel and replace it with your plastic gear.
#3
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Wisconsin
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 and 02 Camaro's
Engine: L96 (LS) and LS-1
Transmission: auto, 6 speed
Axle/Gears: 3.42 gears for both
Re: Truck 700r4 for my 88 Camaro
If it's a 2wheel drive truck trans, your good to go. A trans from a 4 wheel drive has a shorter output shaft and won't work. Just remove the 4 bolts holding the tailhousing and it will come right off. Later model trucks have a metal reluctor wheel where your camaro trans has a plastic speedo gear. Remove the metal wheel and replace it with your plastic gear.
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
08-02-2019 11:12 PM
700r4, 88, camaro, gen, generation, housing, installing, output, shaft, swap, tail, tranny, transmission, truck, work