92 v6 700r4 question?
02-27-2002, 07:54 PM
#1
Member
Thread Starter
Join Date: Mar 2001
Location: Leawood, KS
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
92 v6 700r4 question?
will the 700r4 that came with the 3.1 v6 bolt up to a 350 or are the bellhousing patterns different? any help would be appreciated.
-pat
-pat
02-27-2002, 08:39 PM
#4
Junior Member
Join Date: Feb 2002
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
The 4.3 liter 700s' will bolt up to a v8, but i'm not sure about the camaro motors. There are only two different bellhousing configurations that i'm aware of with the 700 one has a flat top on it and the v8 version bellhousing has a triangle top bellhousing, so if the top of your bellhousing is flat it won't bolt up to a v8. The difference between the two is mainly just the amount of clutches in the drums and the input shaft, other than that all the parts are interchangable, just not the cases
02-27-2002, 08:51 PM
#5
Supreme Member
Join Date: Sep 2000
Location: Los Angeles, CA
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
Engine: LH0 3.1L
Yeah, the 60 degree V6 tranny found in thirdgens wont bolt up to a V8 because they use a different bellhousing pattern. The 60 degree motors are the 2.8L, 3.1L and the 3.4L.
The 3.8L and 4.3L are 90 degree engines just like the V8's and they will bolt up.
The 3.8L and 4.3L are 90 degree engines just like the V8's and they will bolt up.
Thread
Thread Starter
Forum
Replies
Last Post
Iroc8t8
TPI
43
08-26-2015 08:14 AM
