a few issues with my carbed 2.8
#1
Supreme Member
Thread Starter
Join Date: Mar 2005
Location: Honolulu, HI
Posts: 1,539
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
a few issues with my carbed 2.8
ill list off the issues if anybody can shed ANY light on to any of my questions thanks in advance, im trying to condense all my questions into one post
1) Ive noticed lately that my Check Engine light has been coming on, but when i check for codes (useing not only the paper clip method, but with a scanner as well) Theres no codes to be found????? any ideas?
2) ONLY when im acclerating (3/4ths to full open) i hear a fast Tick tick tick, could i be hearing a Lifter tick? this is the only time i hear the ticking, and i have my windows down all the time.
thanks again for any help guys, im trying to get this 2.8 to see 100,000 miles (the way the car is right now im thinking that the previous owner didnt take too good of care of this car )
1) Ive noticed lately that my Check Engine light has been coming on, but when i check for codes (useing not only the paper clip method, but with a scanner as well) Theres no codes to be found????? any ideas?
2) ONLY when im acclerating (3/4ths to full open) i hear a fast Tick tick tick, could i be hearing a Lifter tick? this is the only time i hear the ticking, and i have my windows down all the time.
thanks again for any help guys, im trying to get this 2.8 to see 100,000 miles (the way the car is right now im thinking that the previous owner didnt take too good of care of this car )
#2
Banned
Join Date: Sep 2005
Location: earf
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 firebucket
Engine: less then a geo
Transmission: 5speed crap box
if the tick is only at high rpms it could be lifters.
are you sure you have the timing exact?
and your good pal,electrical tape should take care of that pesky check engine light.
are you sure you have the timing exact?
and your good pal,electrical tape should take care of that pesky check engine light.
#3
Supreme Member
Thread Starter
Join Date: Mar 2005
Location: Honolulu, HI
Posts: 1,539
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Ill have to check the timing again, Last time i checked the timeing was + or - 2 or three degrees of the timing seting on the Emmissions label,
Anything else that ticking could be? maybe an intake leak or something? (crossing my fingers that it isnt a lifter tick)
Anything else that ticking could be? maybe an intake leak or something? (crossing my fingers that it isnt a lifter tick)
#6
Supreme Member
Thread Starter
Join Date: Mar 2005
Location: Honolulu, HI
Posts: 1,539
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Originally posted by Project: 85 2.8 bird
will the car make the same ticking sound if you just rev it up?
will the car make the same ticking sound if you just rev it up?
Originally posted by Parrydise7
Mechanical fuel pump?
I had this strange ticking, that I could only hear on one freeway curve, where they have the "K" rails and only when my window was down. It turned out to be the fuel pump. Damndest thing.
Mechanical fuel pump?
I had this strange ticking, that I could only hear on one freeway curve, where they have the "K" rails and only when my window was down. It turned out to be the fuel pump. Damndest thing.
Yea i hear the ticking as well when ever im near a curve or anyplace that will echo, I aslo hear it inside the car with the windows down/radio off. And yes it hasa Mechanical Fuel pump.
Trending Topics
#8
Supreme Member
Join Date: Jul 2001
Location: BFE, MD
Posts: 4,461
Likes: 0
Received 0 Likes
on
0 Posts
Car: 13 Ram 1500/ 78 Formy
Engine: 5.7 / 7.4
Transmission: 6sp / TH350
Axle/Gears: 3.55 posi / 3.23
more stuff to throw out atcha:
how is the clutch for the fan?
sounds like it only makes the noise under load........
is anything loose under there that could be hitting the fan?
how is the clutch for the fan?
sounds like it only makes the noise under load........
is anything loose under there that could be hitting the fan?
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
09-17-2020 08:26 AM